ZYD-1000 Adhisive Resin Glue For Aluminium Plastic Composite Pipe
PEX-AL- PEX , PP-AL-PP, PPR Aluminum Pipe
This Adhesive resin could provides innocative solution for plumbing
and heating pipe systems,
including application of domesitic water piping,under follor
heating,radiator connection and wall,cooling and heating
installations,district heating andindustrial piping,etc.
PPR pipe adhesive resign is maleic grafted polypropylene used for
PPR piping system,as a breaking
through of PP grafted materials,we make its adhesive resin
to be possible to combine the advanteges of material and poly in
the multi-layer aluminuum plastic composite structures
1. Identification of the substance/preparation and of the
company/undertaking
Trade name: ZDY 1000
Material use: Adhesive for Aluminum-plastic Composite Pipes
Manufacturer:Ningbo ZhongYiDa Imp.&Exp. Co., Ltd.
ADD.:No.35 shunsun road,lubu plumbing town,Yuyao city,Zhejiang PRC315400
2. Hazards identification
Health: The product is not classified as dangerous preparation. However,
inhalation of dust may irritate the respiratory tract. Prolonged
inhalation of high doses of decomposition products may give
headache or irritation of the respiratory tract.
Fire: The product burns, but is not classified as flammable.
Environment: The product is not considered dangerous for the environment.
3.Composition/information on ingredients
The product is a Polyethylene.
Contains no substance classified as hazardous in concentrations,
which should be taken into account according to EC directives.
4.First aid measures
No specific instruction needed.
Skin contact: Cool molten product on skin with plenty of water. Do not remove
solidified product.
5.Fire-fighting measures
Suitable extinguishing media: Water in spread jet, dry chemicals, foam or carbon dioxide. Special exposure hazards: Principal toxicant in the smoke is carbon monoxide.
6. Accidental release measures
Suck or sweep up spill. All spill of material must be removed
immediately to prevent slipping accidents.
7. Handling and storage
Handling: During processing and thermal treatment of the product, small
amounts of volatile hydrocarbons may be released. Provide adequate
ventilation. Local exhaust ventilation may be necessary.Avoid
inhalation of dust and decomposition fumes. Dust from the product
gives a potential risk for dust explosion. All equipment shall be
grounded.
Storage: Safety aspects do not require any special precautions in terms of
storage.
8. Exposure controls / personal protection
Provide adequate ventilation. Local exhaust ventilation may be
necessary.
9. Physical and chemical properties
Appearance: solid, natural colour
| Product Name: ZYD1000 | Date of Issue: | 2010/03/01 |
| Odour: odourless | | | |
| Melting point/range: 126 °C | Ignition temperature: > 300 °C | |
| Density: 0.920g/cm3 | Solubility in water: insoluble in water | |
10. Stability and reactivity
The product is a stable thermoplastic, with no chemical reactivity.
11. Toxicological information
The product is not classified as dangerous preparation according to
Directive 1999/45/EC. However, inhalation of dust may irritate the
respiratory tract. Prolonged inhalation of high doses of
decomposition products may give headache or irritation of the
respiratory tract.
12. Ecological information
The product is not considered dangerous for the environment.
13. Disposal considerations
Reuse or recycle if not contaminated. The product may be safely
used as fuel or landfilled. Proper combustion does not require any
special flue gas control. No leachate is generated in landfills.
Check with local regulations.
14. Transport information
The product is not regulated by ADR/RID, IMDG or IATA
15. Regulatory information
Classification and labelling according to Annex I, Directive
67/548/EEC. Label:
Trade:ZYD1000 Manufacturer: LUSHAN
16. Other information
Issued in accordance with Article 32 of Regulation (EC) No
1907/2006, and its corrigenda. Issuer: Guangzhou Lushan New
Materials Co., Ltd. / Wang Yongxin
