Home > Connectors >

1.2mm pitch 78172 cellphone wire to board type battery connectors 8 position max

Ask Lasest Price
Brand Name :	HRT
Model Number :	A1201H-NP
Certification :	ISO9001/ ISO14001/UL/RoHS/REACH
Price :	USD0.001 to 0.5 per pcs
Payment Terms :	TT, Western Union, PayPal, L/C
Supply Ability :	28 million pcs per month
Delivery Time :	5 to 8 working days after payment checked

Add to Cart

Product Details
Company Profile

1.2mm pitch 78172 cellphone wire to board type battery connectors 8 position max

1, The specification of the product including basic size information, electrical and mechanical properties.

Basic size information
Suitable terminals		A1007T series
Category		Crimp housings
Pitch		1.20mm
Lock to mating part		Yes
Panel mount		No
Circuits		2 to 8pins
Wire insulation diameter		0.80mm Max.

Electrical properties
Current Rating:		1A AC, DC
Voltage Rating		125V AC, DC
Contact Resistance:		20mΩ Max
Insulation Resistance:		100mΩ min
Withstanding Voltage:		500V AC/minute

Mechanical properties
Temperature range		-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

Folllowing pictures are out testing report and exact engineering drawing for your information, please kindly check it, wish it can help you to get what you really need.

Engineering drawing of Molex 78172 alternatives

Testing report

1. Scope

This specification covers the requirements for product performance of 1.20mm pitch wire to board

connectors series.

2. Construction,Dimensions,Material & Plating

See the attached drawings

3. Ratings & Applicable Wires

Item	Standard
Rated Voltage (Max.)	50V AC/DC
Rated Current (Max.) And Applicable Wires	AWG#28	1.5A AC/DC
	AWG#30	1.0A AC/DC
Ambient Temperature Range	-25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description		Procedure	Requirement
4-1	Contact Resistance	Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)	20mΩ (Max.)
4-2	Insulation Resistance	Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)	100MΩ (Min.)
4-3	Dielectric Withstanding Voltage	Mate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)	No Breakdown.
4-4	Contact Resistance on Crimped Portion	Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.	5mΩ (Max.)

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#28	0.9kgf (Min)
5-2	Crimping Pull Out Force		AWG#30	0.7kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	1.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	0.40kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	0.50kgf (Min.)
5-6	Durability	When mated up to 10 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance:40mΩ (Max.)
5-7	Vibration	Amplitude: 1.52mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-8	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description		Procedure	Requirement
6-1	Temperature Rise	Carrying rated current load.(Based upon UL 498)	30℃(Max.)
6-2	Heat Resistance	85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-3	Cold Resistance	-25±3℃,96 hours (Based upon JIS C0020)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-4	Humidity	Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Insulation Resistance 100MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3
6-5	Temperature Cycling	10 cycles of: a) -25℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-6	Salt Spray	Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7	SO2 Gas	24 hours exposure to 50±5ppm. SO2 gas at 40±2℃.
6-8	NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

6-9

Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes

6-10

Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

Circuits	Insertion (Max.)	Withdrawal (Min.)
		1st	3rd	10th
02	1.84	0.41	0.15	0.12
03	2.14
04	2.45
05	2.76
06	3.06

3, we can offer various fast delivery way for you .

We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.

Product Tags:

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

1.2mm pitch 78172 cellphone wire to board type battery connectors 8 position max

1.2mm pitch 78172 cellphone wire to board type battery connectors 8 position max

1.2mm pitch 78172 cellphone wire to board type battery connectors 8 position max

Connector Wire To Board

Pcb To Wire Connectors

1.2mm pitch 78172 cellphone wire to board type battery connectors 8 position max

You May Like

Single row 2.0mm pitch Dupont wire-to- board connector with gold-flash crimp terminals

2.5mm pitch XH housing equivalent wire to board crimp style connectors with bump & lock

2.54mm pitch wire housing battery PCB connector crimp type wire to board connectors

2.54mm pitch RA connector Equivalent I/O connectors Wire to Board Crimp style Connectors

Single Row Wire to board connectors 2.54mm Pitch Female Connector Mated with Pin Header


*From:	Your email address is incorrect!
*To:	RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!