Introduction
Wire to Board connector 1.00mm pitch housing/wafer/terminal A1001
series
Specifications
| Pitch Size | 1.0mm |
| Current rating | 1A AC, DC |
| Voltage rating | 50V AC, DC |
| Withstanding voltage | 500V AC/minute |
| Contact resistance | 20 mΩ Max |
| Insrlation resistance | 100 mΩ Min |
| Temperature range: | -25℃ ~ +85℃ |
| Rated Current (Max.) And Applicable Wire | AWG#28 | 1A | AC/DC |
| Responsive Time | AWG#30 | 1A | AC/DC |
| Panel Life | AWG#32 | 0.5A | AC/DC |
Mechanical Performance
|
| Test Description | Procedure | Requirement |
| Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm /
minute. | Refer to paragraph 7 |
| Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) |
| AWG#30 | 0.8kgf (Min) |
| AWG#32 | 0.5kgf (Min) |
| Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) |
| Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing. | 0.70kgf (Min.) |
| Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.50kgf (Min.) |
| | | | | | | |
Actuator Insertion/Withdrawal Force
Description:
1, A1001HB-NP-1,(single row with protrusions and lock
housing),Terminal:A1001-TPE-A(used in A1001 series housings).
2, Housing used two kinds of raw materials: PA66(halogen free raw)
natural and black , Fire-protection rating are both UL 94-V0.
Minimum packing quantity is 1000pcs/bag.
3. Single row with lock housing from 2pins to 10pins,This product
we have two molds and we can produce 50—100KPCS of this product
every day.
4. Terminals are stamped by Phosphor Broze, E-Stamping before
Tin-plated or Gold-flash ,Tin-plated we calling A1001-TPe-A,
Gold-plated we calling A1001-GPe-A,Minimum packing quantity is
20,000pcs/Reel. The daily production capacity is 300 to 400 KPCS.
5. Terminals' wire range :AWG #28--#32,insulation OD is
0.80mm(Max),The thickness of gold-plating can be customer
repuirements.Gold-flash:Au-0.8u, Ni: 20—40u, Gold-plated 3u:
Au-3u,Ni:20-40u.
Applications:
This product is mainly used for computer, laptop, LCD screen, TV
SET and so on. Mainly used for signal transmission.
