Wire to board connectors pitch 1.25mm 90° wafer connector SMT TYPE
Description:
1.A1255 series is A1255WR-S-NP (Single row wafrer Mates with
A1255-T series housing)
2,Wafer used materials:PA6T Pin: Phosphor Bronze /Gold-flash Solder
tabs: Phosphor Bronze /Gold-flash , Fire-protection rating is UL
94-V0(Black). Minimum packing quantity is 1000pcs/bag.
3. Single row wafer we have 02PIN~10PIN ,15PIN ,20PIN ,25PIN ,30PIN
,The daily production capacity is 30 to 50 KPCS.
| Test Description | Procedure | Requirement |
Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based
upon JIS C5402 5.4) | 20mΩ (Max.) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method
302 Cond. B) | 1000MΩ (Min.) |
| Dielectric Withstanding Voltage | Mate connectors, apply 800V AC (rms) for 1 minute between adjacent
terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method
301)) | No Breakdown. |
| Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry
circuit, 20mV (Max.)., 10mA. | 5mΩ (Max.) |
Electrical:
| Current rated |
1A AC/DC maximum |
| Voltage rated | 200V AC/DC |
| Withstand voltage | 500V AC/minute |
| Insulation resistance | 100MΩ min |
| Contact resistance | 40MΩ max |
| Operating temperature | -25 - 85°C |
Drawing:
Quality:
The world's xinpei Plastic& metal electronic Co.,Ltd.to provide
customers with high efficiency service responsibility, forge ahead,
the endess pursuit
Except the plating ,From Design tooling, stamping ,Injection
molding, assemble, Testing ,packing .All the
step are doing by ourself. So we can control the quality.
1. Manufactured under strict controls.
2. ISO 9001:2008
3. UL Certification
4. Reach Cetitifaction
5. RoHS compliance
6. OEM for PULSE
7. Active Environmental policy
8. Every module tested 3times (not just batch tested)
Automatic insertion Force test
Salt Spray Tester
Service:
Our company for the purpose of "arduous pioneering, pure devotees
of" "scientific management ,quality first ,service ,reputation
first" ,and continuously improve product quality and perfect
service , high-efficiency business management ,to provide customer
with quality products and satisfactory service .
HRT Offer good pre-sales & after-sales service &Strong
technical support
1. New Project: Strong technical and ideal support your new design
2. Existing projects: Try to help customer to save the cost to
offer the good quality product and save
3. time.
4. Free Samples:10~20 PCS of each part number
5. Shipping Fee :We can get 80% off from DHL/UPS/TNT/FedEx, keeping
safe and fast.
6. Customer complaint:24-48 hours reply 8D report
7. Warranty : 24 months ( Merchandise are promised to be promptly
returned, replacement, or repair
8. kits if customers are not satisfied)
