● This machine is composed of a feeder, a printer, a slotter, a die
cutter and a stacker.
● Lead edge feeder.
● Equipped with high-pressure vacuuming device, can sweep off
scraps of paper and impurities on the printing face of cardboard.
● The distance between Anilox roller and rubber roller is
electrically adjusted.
● Printing roller axial moving is electrically adjusted.
● Transmission gear uses good quality alloy steel, after
carburizing and quenching.
● Use spray lubrication and oil line balanced system.
● Use the PLC touch screen multifunction controller. Host machine,
fan, phase motor and so on all use frequency conversion control.
● Slotting unit can electrically adjust the sizes of each part of
the carton box.
● Front pneumatic stacker unit goes up and down, back photoelectric
tracking.
Normal working speed: 120m/min, 150m/min
Size: 920/1200/1400/1500mm * 1900/2100/2300/2600mm
