Australia spray booth, paint booth for car WD-70B

Inside Dimension

6900X4000X2650MM(LXWXH)

Outside Dimension

7000X5550X3430MM(LXWXH)

Main door

3-fold, 3000X2700MM(WXH) with heat insulation glass window

Personal door

1-fold, 800X2000MM(WXH) with one step. There is two sets of pressure

lock which will automatically open when the pressure inside is over the limit

Booth System

Wall panel: Rock Wool material, tongue and groove interlock construction,

thickness: 50mm, 0.426mm steel plate.

Basement and floor: complete steel assemble, 2 rows of grids, 2 rows of

indented plates, galvanized. 2pcs of galvanized ramps, loading capacity of

galvanized grating is 650 kg/wheel

Lighting System

Ceiling light: 4Pcs X8units=32PcsX36W, Philip Lamp

Glass

All window and light cover by ovenproof toughened glass

Generator setting type

Back upper intake air, back upper exhaust air, aluminum alloy frame,

coated steel

Ventilation System

Intake fan: 1Pc turbo fan, 7.5KW motor, air capacity:25000m3/h

Exhaust fan:1Pc turbo fan, 7.5KW motor, air capacity:25000m3/h

Heating system

Italian Riello G20 diesel burner,200000Kcal, 4～6kg/set;

heating-up time: 4～6 min.(Gas burner as optional)

SUS304 Stainless steel heat exchanger, anti-explosion hole for protection,

highest temperature 80C, 1pc pneumatic damper from spraying to baking cycle.

Reasonable structure, safe and reliable, big heat exchanging area, high heat

utilization, more than 90% heat exchanging rate

Filter system

Prefilter, high efficiency filter EU5 Fine Filters, 6pieces (ceiling filter), floor filter,

exhaust active carbon filter

Control system

Spraying, risen-temperature spraying, baking temperature, time setting,

lighting switch, time accumulator, emergency stop, failure alarm,

limited-temperature device, most of electrical spare part is import, C.E standard

Total power

17KW