GPON FTTH Fiber Optic Passive Mini Optical Splitter 1x16 900um
Single mode SC APC connectors
Planar lightwave circuit (PLC) splitter is a type of optical power
management device that is fabricated using silica optical waveguide technology. It
features small size, high reliability, wide operating wavelength range and good
channel-to-channel uniformity,and is widely used in PON networks to
realize optical signal power splitting. Yingda provides whole series of 1xN and 2xN splitter products that are
tailored for specific applications. All products meet GR-1209-CORE-2001 and
GR-1221-CORE-1999 requirements.
Optical Fiber Splitter Specification
fiber optic splitter 1xN SPLITTER
| Item | 1x2 | 1x4 | 1x8 | 1x16 | 1x32 | 1x64 | 1x128 |
| Fiber Type | G.657.A |
| Working Wavelength | 1260nm~1650nm |
| Standard Insertion Loss(dB) | ≤4.2 | ≤7.6 | ≤10.7 | ≤14.0 | ≤17.2 | ≤20.8 | ≤24.0 |
| P-Grade Insertion Loss(dB) | ≤4.0 | ≤7.4 | ≤10.5 | ≤13.8 | ≤17.0 | ≤20.4 | ≤23.7 |
| Uniformity(dB) | ≤0.6 | ≤0.8 | ≤0.8 | ≤1.0 | ≤1.5 | ≤2.0 | ≤2.0 |
| PDL(dB) | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.4 | ≤0.5 |
| Wavelength Dependent Loss(dB) | ≤0.6 | ≤0.8 | ≤0.8 | ≤1.0 | ≤1.5 | ≤2.0 | ≤2.0 |
| Return Loss(dB) | ≥50 |
| Directivity(dB) | ≥55 |
| Operating Temp.Gange | -40℃~+85℃ |
Note:The above parameter is for Splitter with connector.If w/o
connector,insertion loss will reduce by 0.2dB.
|
Fiber Optic PLC Splitter Features
Ø Low insertion loss, Low PDL and High reliability
Ø High return loss and Good repeatability
Ø Wide wavelength range
Ø Excellent channel-to-channel uniformity
Fiber OpticSplitter Application
Ø LAN, WAN and Metro Networks
Ø FTTH project & FTTX Deployments
Ø CATV System
Ø GPON, EPON
Ø Fiber Optic Test Equipment
Ø Data-base Transmit Broadband Net
All connectors, cable, plc chip is test 100% before in factory. and
each with figure ring for better identification on-site
constructions.
fiber optic coupler splitterSplitter Fiber Optic Steel Tube size:
| Item | 1×2 | 1×4 | 1×8 | 1×16 | 1×32 | 1×64 |
| Length*Width*Height(mm) | 60×7×4 | 60×7×4 | 60×7×4 | 60×12×4 | 80×20×6 | 100×40×6 |
| Item | 2×2 | 2×4 | 2×8 | 2×16 | 2×32 | 2×64 |
| Length*Width*Height(mm) | 60×7×4 | 60×7×4 | 60×7×4 | 80×12×4 | 100×20×6 | 100×40×6 |
1x16 Passive Optical Fiber PLC Splitter Steel Tube
2x32 splitter Fiber Optic Splitter Order Information
| Port | Fiber | Input Pigtail | Input Connector | Input Pigtail
Length | Output Pigtail | Output
Connector | OutputPigtail
Length |
| PLC | 102=1x2
104=1x4
108=1x8
116=1x16
132=1x32
164=1x64
128=1x128
204=2x4
208=2x8
216=2x16
232=2x32
264=2x64 | 1=G657A
2=G652D
SP=Special | 1=250um
Bare Fiber
2=900um
tight uffer
3=900um
loose tube
4=2.0mm
cable
5=3.0mm
cable
SP=Special | NE=None
SU=SC/UPC
SA=SC/APC
LU=LC/UPC
LA=LC/APC
FU=FC/UPC
FA=FC/APC
SP=Special | 0=0.5m
1=1m
2=1.5m
3=2m
4=3m
SP=Special | 1=250um
Bare Fiber
2=900um
tight uffer
3=900um
loose tube
4=2.0mm
cable
5=3.0mm
cable
SP=Special | NE=None
SU=SC/UPC
SA=SC/APC
LU=LC/UPC
LA=LC/APC
FU=FC/UPC
FA=FC/APC
SP=Special | 0=0.5m
1=1m
2=1.5m
3=2m
4=3m
SP=Special |
Fiber Optic PLC Splitter Pack Information
PLC splitter,2x2 coupler can be pack in different type, plastic bag like fiber patch cord,
blister box, cardboard box, master carton boxes. If without
connectors, suggest to use 100pcs in a box so as to make sure good
and high protection to fiber and steel tube, due to the huge
freight cost increase day by day.
