High Frequency RF Microwave Pcb Radio Broadcast Station FM
Transmitter PCB
Quick Detail :
| Type | High FrPcb |
| Material | Rogers |
| Layer | Multilayer |
| Size | 10*9cm |
| Permittivity | 2 |
| Color | Green |
| Surface Finish | Lead-free Hasl
|
Features:
Rogers pcb multilayer pcb with high frequency can improvide the
products quality ,with high techolonogy treatment improve the life
cycle of the products .The high frequency rogers pcb with 4 mil 1
oz ,also with DHI half hole blind buried techonology . Immersion
gold surface finish make the pcb 's conductive performance
enhancements.Multilayer pcb design ,the precision of the pcb
improves much more better .Low dielectric : 3 dielectric
conductivity much more precision .Rogers material used in RF
Microwave fields in radar system .
Parameter:
| Model | Parameter | thickness(mm) | Permittivity(ER) |
| Rogers | RO5880 | 0.254 0.508 0.762 | 2.20 ± 0.02 |
| RO4350 | 0.254 0.508,0.8,1.524 | 3.5 |
| RO4003 | 0.508 | 3.38 |
| TACONIC | TLF-35 | 0.8 | 3.5 |
| TLA-6 | 0.254,0.8,1,1.5, | 2.65 |
| TLX-8 | 0.254,0.8,1,1.6 | 2.55 |
| RF-60A | 0.64 | 6.15 |
| TLY-5 | 0.254,0.508,0.8 | 2.2 |
| TLC-32 | 0.8,1.5,3 | 3.2 |
| TLA-35 | 0.8 | 3.2 |
| ARLON | AD255C06099C | 1.5 | 2.55 |
| MCG0300CG | 0.8 | 3.7 |
| AD0300C | 0.8 | 3 |
| AD255C03099C | 0.8 | 2.55 |
| AD255C04099C | 1 | 2.55 |
| DLC220 | 1 | 2.2 |
Description :
RT/duroid® 6006 & 6010 Laminates
RT/duroid® 6006 microwave laminates are ceramic-PTFE composites
designed for electronic and microwave circuit applications
requiring a high dielectric constant. RT/duroid 6006 laminate is
available with a dielectric constant value of 6.15 and RT/duroid
6010LM laminate has a dielectric constant of 10.2.
RT/duroid 6006 microwave laminates feature ease of fabrication and
stability in use. They have tight dielectric constant and thickness
control, low moisture absorption, and good thermal mechanical
stability.
RT/duroid 6006 laminates are supplied clad both sides with ¼ oz. to
2 oz./ft2 (8.5 to 70 μm) electrodeposited copper foil. Cladding
with rolled copper foil is also available. Thick aluminum, brass,
or copper plate on one side may be specified.
PrePreg Material
It announced TerraGreen, a halogen-free, ultra-low loss,
RF/microwave/high-speed material. TerraGreen is engineered for such
high-performance applications as power amplifier boards for 4G LTE
base stations.
Typical Applications:
- Space Saving Circuitry
- Patch Antennas
- Satellite Communications Systems
- Power Amplifiers
- Aircraft Collision Avoidance Systems
- Ground Radar Warning Systems
- Datalink on cable systems
- Remote meter readers
- Power backplanes
- LMDS and wireless broadband
- Base station infrastructure
Production Description :
| Parameter | Value |
|---|
| Specific gravity/density | 1.850 g/cm3 (3,118 lb/cu yd) | | Water absorption | −0.125 in < 0.10% | | Temperature index | 140 °C (284 °F) | | Thermal conductivity, through-plane | 0.29 W/(m·K),[1] 0.343 W/(m·K)[2] | | Thermal conductivity, in-plane | 0.81 W/(m·K),[1] 1.059 W/(m·K)[2] | | Rockwell hardness | 110 M scale | | Bond strength | > 1,000 kg (2,200 lb) | | Flexural strength (A; 0.125 in) - LW | > 440 MPa (64,000 psi) | | Flexural strength (A; 0.125 in) - CW | > 345 MPa (50,000 psi) | | Tensile strength (0.125 in) LW | > 310 MPa (45,000 psi) | | Izod impact strength - LW | > 54 J/m (10 ft·lb/in) | | Izod impact strength - CW | > 44 J/m (8 ft·lb/in) | | Compressive strength - flatwise | > 415 MPa (60,200 psi) | | Dielectric breakdown (A) | > 50 kV | | Dielectric breakdown (D48/50) | > 50 kV | | Dielectric strength | 20 MV/m | | Relative permittivity (A) | 4.8 | | Relative permittivity (D24/23) | 4.8 | | Dissipation factor (A) | 0.017 | | Dissipation factor (D24/23) | 0.018 | | Dielectric constant permittivity | 4.70 max., 4.35 @ 500 MHz, 4.34 @ 1 GHz | | Glass transition temperature | Can vary, but is over 120 °C | | Young's modulus - LW | 3.5×106 psi (24 GPa) | | Young's modulus - CW | 3.0×106 psi (21 GPa) | | Coefficient of thermal expansion - x-axis | 1.4×10−5 K−1 | | Coefficient of thermal expansion - y-axis | 1.2×10−5 K−1 | | Coefficient of thermal expansion - z-axis | 7.0×10−5 K−1 | | Poisson's ratio - LW | 0.136 | | Poisson's ratio - CW | 0.118 | | LW sound speed | 3602 m/s | | SW sound speed | 3369 m/s |
|
|---|
Competitive Advantage:
1) With UL,ROHS,ISO,IPC
2).Lead time:3-10 working days
3)Competitive price best quality
4).Rich 20 years experience in High Tg Multilayer PCB .
What Information customer need to provide for quotation ?
1. PCB Gerber files ,protel,powerpcb,Autocad,etc.
2. BOM list for PCB assembly.
3. Send us your sample PCB or PCBA.
4. OEM is acceptable.
Detailed Images :
Payment Term :
