The XJ Mode Pump is a Overhung Impeller Centrifugal Pump Which is
Widely Used in Papermaking
Description:
This pump is an efficient and energy-saving product. According to
the current papermaking process and the actual usage, the product
is designed on the base of foreign advanced technology. It adopts
open impeller with three blades, and the gap between the impeller
and the side panel can be adjusted, which can make the impeller
operating stably and continuously. The weight of non-clog impeller
is light, so the efficiency is high and operation is stable. In
addition, the motor power is smaller than other widely used ones.
The feature of the product:
1. The pump adopts single-suction overhung structure, and the main
parts: pump casing, impeller, back cover, shaft, suspension, etc.
2.Check from the pump inlet, the impeller is counterclockwise.
Inhalation of the liquid along the axis, the horizontal direction
of emission.
3. The pump adopts open-door structure, so it is no need to remove
the line when maintenance.
4. Pump shaft is supported by two rolling bearings or one angular
contact ball bearing and one ball bearing. And they are lubricated
by thin oil.
5. The pump is driven by motor directly
6. When use open type impeller, the liquid will contain certain
gas; and the clearance between impeller and side cover can be
adjusted, so the impeller can remain a constant clearance and
continuous high performance
Seal: mechanical seal and packing seal
XJ mode spectrogram:
