Electric Machine No Clogging High Flow Single Stage Centrifugal
Pump
Description:
This pump is our new designer by absorbing advantages of foreign
products, the main structure is single-stage, and singe-suction
cantilevered structural support. The intake is axial direction
suction, as well the output is center upright, which install into
seat with motor.
The pump adopt double-pointed ball bearing structure, the front
side use lubricating oil, the back side use grease lubricant,
between them is oil conductive pipe, to observe the seal condition
and recycle heat-conductive oil.
It adopt self heat emanate system, change tradition water cooling
system, the structure is simple, small size and economize the
power.
Feature:
1. Compact structure, beautiful outline, stable operation, low
noise;
2. Both inlet and outlet of this pump are placed under the axial
line, so it is unnecessary to remove the inlet and outlet pipeline
and motor;
3. The shaft seal of water pump has fine mechanical seal and soft
stuffing seal, which can be selected according to different
condition by user;
4. The impeller is static-balance calibrated, fixed on the shaft
with round nut, and its axial position can be adjusted via the
round nut;
5. The pump is direct drove by motor via resilient coupling, it can
be drove by internal combustion engine if it is necessary.
Application:
Single Stage Single Suction Centrifugal Pump is used for conveying
water or the physical and chemical properties similar to water and
other liquids, is transported liquid temperature shall not be
higher than 80℃, suitable for factories, mines, urban water supply,
power stations, agricultural irrigation and water conservancy.
