095000-5600 095000-5650 Denso Injector Shims Adjustment B23
Name: Injector shims, Common rail injector adjusting shims
Model: B23
Specification: Φ3.15/Φ5.75
Thickness range: 1.00- 2.50mm
Thickness difference. 0.05mm/spec
Total type: 31 types
Total quantity per set: 310pcs
Application: for the adjusting of Denso common rail injectors,
including but not limited in below models:
095000-5600 095000-5650
095000-5801 095000-7030
16600 EB300 16600EN821 etc
This B23 is for Denso common rail injectors. You could also order
based on the thickness you need(10pcs/thickness).
We supply common rail adjust shims for Bosch and Denso common rail
injectors:
* For Bosch injectors:
B11, B12, B13, B14, B15, B16, B17, B22, B25, B26, B31, B37, B40,
B41, B42,
* For Denso injectors:
B21, B23, B24, B27, B45
You could choose the specification for each model based on what you
need.
We also select the most popular models and specification as a set
for you, our customers, to try:
A: Whole series Shims sets including the both Bosch and Denso
shims:
* Ordering Code: TQ10 Set including B11/B12/B13/B14/B16/B22/B25/B26/B27/B31
- 10 models applied to both Bosch and Denso common rail injectors
- 10 types of most popular thickness of each model
- 10pcs for each thickness
in total 1,000pcs in the set
* Ordering Code: TD05 Set including B11/B12/B13/B14/B16/B22/B25/B26/B27/B31
- 10 models applied to both Bosch and Denso common rail injectors
- 10 types of most popular thickness of each model
- 5pcs for each thickness
in total 500pcs in the set
B: Shims sets for Bosch common rail injectors:
* Ordering Code: TB07 including B13/B14/B16/B22/B25/B26/B31
- 7 models applied for Bosch common rail injectors
- 10 types of most popular thickness of each model
- 10pcs for each thickness
in total 700pcs in the set
C: Shims sets for Denso common rail injectors:
* Ordering Code: TD04 including B21/B23/B24/B27
- 4 models applied for Denso common rail injectors
- 10 types of most popular thickness of each model
- 10pcs for each thickness
in total 400pcs in the set
FULL SET OF B23 SHIMS WITH 31 TYPES, 10PCS/TYPE, IN TOTAL 310PCS
| ITEM | ORDERING CODE | SIZE | QTY | PICTURE & SPECIFICATION |
| 1 | B23 | 1.000 | 10PCS |
B23
SPECIFICATION: Φ3.15/Φ5.75 DENSO
0.05MM DIFFERENCE/THICKNESS
1.000-2.500 MM(0.020±0.004)
IN TOTAL 31 THICKNESSES |
| 2 | B23 | 1.050 | 10PCS |
| 3 | B23 | 1.100 | 10PCS |
| 4 | B23 | 1.150 | 10PCS |
| 5 | B23 | 1.200 | 10PCS |
| 6 | B23 | 1.250 | 10PCS |
| 7 | B23 | 1.300 | 10PCS |
| 8 | B23 | 1.350 | 10PCS |
| 9 | B23 | 1.400 | 10PCS |
| 10 | B23 | 1.450 | 10PCS |
| | | | |
| 11 | B23 | 1.500 | 10PCS |
| 12 | B23 | 1.550 | 10PCS |
| 13 | B23 | 1.600 | 10PCS |
| 14 | B23 | 1.650 | 10PCS |
| 15 | B23 | 1.700 | 10PCS |
| 16 | B23 | 1.750 | 10PCS |
| 17 | B23 | 1.800 | 10PCS |
| 18 | B23 | 1.850 | 10PCS |
| 19 | B23 | 1.900 | 10PCS |
| 20 | B23 | 1.950 | 10PCS |
| | | | |
| 21 | B23 | 2.000 | 10PCS | |
| 22 | B23 | 2.050 | 10PCS |
| 23 | B23 | 2.100 | 10PCS |
| 24 | B23 | 2.150 | 10PCS |
| 25 | B23 | 2.200 | 10PCS |
| 26 | B23 | 2.250 | 10PCS |
| 27 | B23 | 2.300 | 10PCS |
| 28 | B23 | 2.350 | 10PCS |
| 29 | B23 | 2.400 | 10PCS |
| 30 | B23 | 2.450 | 10PCS |
| | | | |
| 31 | B23 | 2.500 | 10PCS |
Competitive Advantage:
- control product precision dimension within 0.002mm
- no less than 5 times from finishing process to finished product
- Reasonable Price
- Good after Service
- International standards
- Selected and used by research institutes
- Supplied to fuel injector manufacturers
- First choice for maintenance stations
- Ranking No.1 among the similar products in the market
Description:
Features of ALTURA high-precision adjusting shims:
1. Product precision
Precision is the key requirement for adjusting shims.Accurate
adjustment for fuel quantity si completed
depending on grouping of products.We adopt high precision optical
ruler to control lapping dimension,
and can control product precision dimension within 0.002mm.We
finish grouping by inspecting one product
with two products inside dustfree workshop.One product is measured
for no less than 5 times from finishing
process to finished product (Testing methods:use high precision
digital display micrometer to measure
conformity between actual dimension and required dimension,and
whether the dimension for same
grouped products is same or not.)
2. Geometric tolerance
Geometric tolerance of adjusting shims is directly related to the
maintenance quality of fuel injectors.
Main geometri tolerance requirement for adjusting shims is depth of
parallelism.Large shim will affect
product tightness while small shim will affect reliability and
stability of products.We adopt high-precision
double-sided lapping machine to ensure and control depth of
parallelism for products within 0.002mm.
Adoption of one-time forming process better ensures product
axiality(Testing methods:use parallelism
tester and deflection instrument to test parallelism depth and
axiality respectively)
3. Material quality and hardness
Material quality and hardness of adjusting shims affect durability
and stability of products.We choose
high quality material and advanced thermal treatment
equipments/technology.
4. Cleanliness
Product cleanliness can be better ensured due to multi-channel ultrasonic cleaning, dust-free workshop
packaging and plastic case sealed packaging.
