High Efficiency Longitudinal Seam Welding Machine Diameter 500mm
Indoduction:
This set equipment is the most economical configuration,with high
efficiency
and reliable quality,they can let users make raw materials to rough
poles
without cooperation.
light pole processing equipment:
1. CTL 6*1800 cut to length line
2. 2-WE67Y-400/7000 tandem press brake(for the bend street poles)
3. 500/14000 automatic light pole welding production line
4. 63T light pole straightened machine.
5. shearing machine for cut the base plate
6. iron worker for punching the hole of base plate
7. base plate welding machine
8. light pole door cutting machine
light pole machining step:
1. cut to length line
decoiler---side guiding unit---leveling machine---cutting machine
transverse shear ---taper slitting
It is for light pole material uncoiling, leveling, cutting, scrape
edge slitting and taper slitting process,
to get one side small width, one side big width steel plate.
2. CNC Tandem press brake tobend the pole
This machine was combined by two sets of press brake. tandem
achieve synchronization working.
single machine was combined by worktable ram and right and left
wall board. wall board adopt
assemble structure due to the transportation. the rack has enough
rigidity. two cylinders install to
the right and left wall board, under the effect of electric
operation system, drive the slider running
down. on slide there is upper dies, when upper and lower dies touch
workpieces, system raise
pressure, form the workpieces. use different dies, under different
bending, can get the different
types of workpieces. the quality is reliable and stable.
3. light pole shutting welding machine
light pole shut welding machien model :500/12000, it is suitable
for one piece type polygonal and
circle taper light pole. it is automatic welding line, the dolly
with speed adjustable motor can pull the
light pole from small end to big end, The hydraulic cylinder
through mechanical chain, worm wheel
push the clamping wheel to close the pole and do welding at same
time.
4. light pole straightened machine
it is for straightening the street light pole and high mast after
welding and Hot Dip
Galvanizing process.
5. shaering machine to cut the plate steel
the shearing machine can uct different thickness sheet metal, it is
suitable to cut the base plate
of light pole.
6. hydraulic iron worker
the machien can punching and cutting the hole of the base plate of
light pole
7. base palte welding machine
It is suitable for conical or round pole‘s base plate welding
process.
Also, It is suitable for round bar, round pipe to do girth welding.
According the pole or round
bar’s size to set the time for one turn rotation, push the button,
the round bar will start to rotate,
at same time, the welding also will start. When one turn reached ,
the rotation and welding
will stop automatically.
8. light pole door cutting machine
It is suitable for conical, octagonal light pole door CNC cutting,
Also it can cut round pipe.
The cutting shape can be circle, square, rectangle, elliptic type
etc and any which can be draw
designed by computer.
