3.2mm internal diameter and 10.5mm outside diamter size dot OEM
approved SAE J1401 FMVSS10
-- Product Description --- www.qdgybrakehose.com
Rubber Brake Hose Specifications:
| Inner Diameter | Outer Diameter | Outer layer | Double braid | Inner layer |
| 1/8" (3.2mm) | 0.413" (10.5mm) | EPDM | PVA | EPDM |
| 3/16" (4.8mm) | 0.492" (12.5mm) |
Rubber Brake Hose Features:
- Two braid PVA reinforced hose
- Meets FMVSS-106 and SAE J1401 specifications
- Every brake hose pressure tested to 3500 psi( 240 bar or 24Mpa )
- Burst pressure:minimum 7250 psi ( 500 bar or 50Mpa )
- Temperature range -50°C to 121 °C
- Compatible with DOT3,DOT4 and DOT4+ brake fluides
Rubber Brake Hose Advantages:
- Built to DOT and SAE automotive industry quality and safety
standards.
Hoses constructed of EPDM rubber and PVA braid, offering high
dynamic strength and chemical & thermal resistance
Brake Hoses with banjo end fittings are packaged with new copper
washers to assure proper sealing.
Brake Hoses tested up to 4,000 PSI without rupture based on burst
test
Application:
For use in braking system of the vehicle.
