Introductions:
1. How do I know if I need CO2 laser?
Anyone who has sun damaged, aging skin, irregularly pigmented skin,
wrinkles, sagging, irregular texture of the skin or other skin
condition that could be expected to be improved with this treatment
that understands the risks, costs and time necessary to achieve the
full benefit of the procedure and who has realistic expectations of
the ultimate outcome.
2. What benefits can I expect?
Results that are expected are a very significant and noticeable
reduction in the components of sun damaged skin such as “age-spots”
(also called sun freckles, liver spots, and lentigines), fine
lines, wrinkles, scarring, uneven coloration, skin laxity, textural
irregularities, dull tone, and a thinned collagen layer. The skin
will continue to improve for a period of 6 months following the
procedure provided proper skincare is used and sun exposure is
minimized. Sometimes the results are not significant until the 6th
and even the 9th month, depending on the person's age, their
aftercare routine and their history of smoking
3. Is there another way to get the same effect?
Typically, there are no other treatments that can give you as much
of an overall effect with only one treatment. You would have to
combine the above with fillers or tissue tightening devices to
achieve similar effects.
Applications:
1. Skin renewal, skin rejuvenation and collagen regeneration
2. Acne treatment and scars removal
3. Removing all kinds of wrinkles
4. Remove neoplasms
5. Pigment removal, removing chloasmas, age spots removal,
blemishes treatment, speckle removal
6. Treat telangiectasis
7. Sun damage recovery and skin renewing
8. Eliminates scrub
9. Pierce ears
10. Tightening and whitening skin, pore shrinking
11. Effective treatment with skin hydroponic, skin rough
Technical Specifications:
Wavelength | 10600nm |
Laser apparatus | Sealed off laser device simulated by direct current |
Optical beam quality | TEM00 |
Output power | 40w |
Spot size | 0.02~0.05mm2 |
Aiming beam | Red semiconductor laser (635nm, less than 5mw) |
Beam transport device | Articulated arm with 7-joint and balance weight |
Working mode | Continuous operation |
Output Mode | Continuous, single pulse, interval pulse and super pulse |
Scan scope | Max 20mmx20mm |
Scan graphics | Circle, triangle, square, rectangle,hexagon, ellipse, line |
Scanning Mode | Random , Normal and Midsplit scan |
Scanning speed | More than 10m/s |
Energy | 1- 40W |
Pulse width | 0.1-5.0ms |
Distance | 0.1-2.6mm |
Input power | 450VA |
Cooling system | Water and air circulation |
Environment temperature | 5℃~40℃ |
Relative humidity | Less than 80% |
Power | 220V, 50HZ |
