KATA API 6D VALVE TRUNNION MOUNTED BALL VALVE HIGH QUALITY NPS 2"~56"

CAST TRUNNION BALL VALVE
The trunnion ball valve is used to cut off or connect the media in various of Class150~Class2500. The valves made of different materials are suitable for various media such as water, steam, oil, liquefied gas, natural gas, coal gas, nitric acid, oxidizer, urea and etc. The driving modes include manual operation and electric operation. The connection ends can be flange or butt welding.

STRUCTURAL FEATURES
1. Double Block And Bleed(DBB)
When the valve is closed and the middle cavity is emptied through the discharge valve, the upstream and downstream seats will independently block the fluid at the inlet and outlet to realize double block function. Another function of the discharge device is that the valve seat can be checked if there is any leakage during the test. In addition, the deposits inside the body can be washed and discharged through the discharge device to reduce damage to the seat by impurities in the medium.
2. Low Operating Torque
The trunnion pipeline ball valve adopts the trunnion ball structure and floating valve seat, so as to achieve lower torque under operating pressure. It uses self-lubricating PTFE and sliding bearing to reduce the friction coefficient to the lowest in conjunction with the high intensity and high fineness stem.
3. Emergency Sealing Device
The ball valves with the diameter more than or equal to 6(DN150) are all designed with sealant injection device on stem and seat. When the seat ring or stem O ring is damaged due to accident, the corresponding sealant can be injected by the sealant injection device to avoid medium leakage on seat ring and stem. If necessary, the auxiliary sealing system can be used for washing and lubricating the seat to maintain its cleanliness.
4. Fireproof Structure Design
In case of fire during the use of valve, the seat ring, stem O ring and middle flange O ring made of PTFE, rubber or other non-metal materials will be decomposed or damaged under high temperature. Under pressure of the medium the ball valve will push the seat retainer rapidly towards the ball to make the metal seal ring contact the ball and form the auxiliary metal to metal sealing structure, which can effectively control valve leakage. The fireproof structure design of trunnion pipeline ball valve conforms to requirements in API 607,API 6FA,BS 7655 and other standards.
5. Anti-static Structure
The ball valve is provided with the anti-static structure and adopts the static electricity discharge device to directly form a static channel between the ball and body or form a static channel between the ball and body through the stem, so as to discharge the static electricity produced dut to friction during the opening and closing of ball and seat through the pipeline, avoiding fire or explosion that may be caused by static spark and ensuring system safety.
6. Reliable seat sealing structure
The seat sealing is realized through two floating seat retainers. They can float axially to block the fluid, including ball sealing and body sealing. The low pressure sealing of valve seat is realized by spring pre-tightening. In addition, the piston effect of valve seat is desinde reasonably, which realizes high pressure sealing by the pressure of the medium itself. The following two kinds of ball sealing can be realized.
7. Single Sealing (automatic Pressure Relief In Middle Cavity Of Valve)
Generally, the single sealing structure is used, that is, there is only the upstream sealing. As the independent spring loaded upstream and downstream sealing seats are used, the over-pressure inside valve cavity can overcome the pre-tightening effect of the spring, so as to make the seat release from the ball and realize automatic pressure relief towards the downstream part.

Kata Valve (Group) Co.,Ltd. is headquartered at Baoshan City Industrial Zone,Shanghai China, occupying over 35 thousands square meters and will be looking at other expansions in the near future. The registration capital of the whole Group comes to RMB 100 Millions. Also it is one of high-tech enterprises in Shanghai, a member of the Association of China General Machinery, and a regular supplier to China Petroleum & Natural Gas Corp,China Petrochemical,China Power,and China Sea Oil etc.

With an experience of about 30 years in manufacturing all kinds of valves,Kata specializes in disigning, making and marketing valves for all industries. Its products range from Ball, Butterfly, Gate, Globe,Check,Plug valves to Marine valves and other valves;nominal size from 1/2" to 48" (DN15 to DN1200);nominal pressure from 150Lb to 2500Lb (PN1.0Mpa to PN42.0Mpa); materials cover WCB, WCC, WC6, WC9, CF8, CF3, CF8m, CF3M, LCB, LCC, A105, 304, 316, 304L, 316L, F11, F22, LF2, F51, etc. The products are widely used in the fields of petroleum, chemical, metallurgy, power, fuel gas, city pipeline networks and so on. Certificated with ISO9001, API6D, CE/ PED, Kaitai has developed excellent quality control and management system.

Kata has a series of modern machines and equipments such as vertical lathes, drill press, milling lathe, grinding machine , other general machine tools and physical & chemical analysis & experiment devices. Also it has developed a well-trained and dedicated team including engineers,technicians and other employees. This allows us to offer customers quality product,competitive pricing and prompt deliveries. We always work hard to improve our existing products and pursue new ideas and ways to stay ahead of the ever changing market.