Marine Lifesaving Foldable Radar Reflector For Liferaft / Lifeboat
Application of Radar Reflector
Installed in the life boat, one of life raft accessories.
Characteristics of Radar Reflector
Made of aluminium alloy, protected by plastic head, good tructure
and reflectivity, light and small, no power needed, and safe. It
can increase the chance of trapped people being found out.
Installation:
(1) Take reflection equippment out o packing bag.make the
conducting flake surround the stainless steel rctating axis and
outspread as 8 right-angle triangle up and down,then insert the
spring pin into the ellpse hole and then screw by 90 °to lock,
(2)Pull out a stainless beanpcle in the center of the stainless
steel rotating axis by 20cm.then screwlight lastic bolt&nut
(3)Inset the 20cm long beanpole connected to refletion equippment
to the hole on top sail of the raft,then insert it to the stainless
steel up-and-down bracket in the body of the raft,at last screw
tight all the plastic bolt & nut. make sure they firmly fixed to
the bottom of the raft
Main Specification:
| Radar cross section | Reflectivity | Approval |
| ≥40m2 | >95% | CCS |
Photos
