SS304 High Performance Hydraulic Check Valves For Avoiding Pipe
Hammering
Quick Detail:
Hydraulic Check Valves
Type: Clamped, thread, Welded
Size: Request of customer
Specification
| Product Name: | SS304 Clamped Check Valve,Non-Retention valve with thread type,
avoid pipe hammering |
| Valve Body Material: | SS304 or SS316L |
| Seal Material: | EPDM |
| Max. Working Pressure: | 10Bar |
| Opening pressure: | 0.1-0.3bar |
| Max. Working Temperature: | 120 degree C |
| Availably size: | 1"-4", DN10-DN100 |
| Availably connection: | Thread,Weld,Clamp |
| Availably standard: | DIN,SMS,3A |
| Certificate: | FDA,CE |
Technical Information
• A Sanitary Check Valve can vary in size from 1/2″ to 4″.
• The end connection can be butt-welded, sanitary tri-clamped,
threaded or others upon request.
• The maximum Working Pressure available is 10 bar (145psi)
• Valves are available for the following Cracking pressures:
4.35psi (0.3bar) for DN25
2.9psi (0.2bar) for DN32-40
1.45psi (0.1bar) for DN50-100
• The temperatures at which the valves function depending on
material range from:
EPDM 14°F to 248°F (-10℃ to 120℃)
SILICONE -22°F to 356°F (-30℃ to 180℃)
VITON (FPM) 23°F to 356°F (-5℃ to 220℃)
Teflon (PTFE) -4°F to+482°F (-20℃ to 250℃)
• The Surface finish can be Ra 32μin (0.8μm) as default, or better
upon request.
Applications:
1. Check valve is a valve that prevents the fluid from flowing back
and ensures to flow in only one direction.
2. It can be used to prevent the flow less from returning avoid
pipe-hammering
3. It is used in the food processing,beverages, wine,
oil,cosmetics, pharmaceutical and chemical industries.
Things to Keep in Mind When Installing a Sanitary Check Valve
Sanitary Check Valves can be installed horizontally or vertically.
However, the following specifications must be followed for ball and
disk check valves:
– Ball Check Valve –
In a vertical setting, the product has to flow from bottom to top
so that gravity can push the ball in and out of the seat.
In a horizontal setting, the curved portion of the valve needs to
be upright and at 90 degrees to the pipe. This makes sure that the
valve is free-draining and the ball sits properly.
– Disk Check Valve –
Disk Check Valves are not free-draining in a vertical setting.
Therefore, for them to be free-draining, they need to be in a
horizontal position.
Drawing
Certificate
Donjoy manufacture products certified by 3A,CE,FDA and so on,
according to GMP, EHEDG standard. Production strictly enforce
ISO9001-2008 management system.
Tag :One way valve, Spring check valve, Non retention valve
