Cable Fault Detector xk2001
The normal operation of cable-communication and electric transport
completely rely on the good condition of the
cable-circuit. Once the circuit breaks down and without punctually
examination and repairing, it will no doubt trigger the
mass economic loss and bad social influence. So the electric fault
measuring testing instrument is a very important tool. The
intellectual testing instrument uses multiple testing methods and
adopts the most advanced electronic devices and with
computer and special electronic technology, combining our company’s
successful experience of long-time exploitation on
cable-fault measuring testing instruments, and it is absolutely of
high tech, intelligence and abundant functions.
Our cable-fault detector is a testing device of good integrity. It
can test on the High Resistance Flashover Fault, Grounding
High and Low Resistance Fault, Short & Off Circuit on the Cable
Fault and Poor contact and etc. If being equipped with
sounding method and locating instrument, it can exactly detect the
fault point. Furthermore, it especially applies to test for
various power cable and communication cable.
Scope of application and using purpose
The instrument can test all kinds of electric cable(voltage of
1KV-35KV) and the Short Circuit, Grounding, Leakage of High
Resistance. High Resistance Flashover, Out Line and Bad Contact
fault on the local cables, frequency modulation communication
cables, coaxial cable and metal aerial cables. It also can test the
length of cable and the spread velocity on the cable.
The longest testing distance is 32KM (100KM for the open-wire line)
Testing .dead zone is 1M.
Resolution of reading is 1M
Power dissipation is 5VA
Service condition :
Environment temperature 0℃~+40℃
Terminal temperature -10℃~+50℃
Relative humility 90%RH
Dimension: 225×165×125mm3
Weigh: 2kg
