The POE Switch provides power and data from a single point. using Power over Ethernet (PoE) over a single Cat-5 cable.
The POW switch is good for powering POE devices, such as POE ip
cameras, WLAN access points, IP phones, office aceess control
systems, and other PD devices. It offers a line of high quality
products that provide a total solution for ethernet application in
different environments.
Main Features:
- Fully IEEE802.3af/IEEE802.3at standard compliant
- Support PoE power up to 15.4W/25.5W for each PoE ports
- Auto detect powered device(PD)
- Long distance PoE date transmission.(250m)
- Safe and reliable power to most PoE end device
- Lighting-proof and Compact design
- Plug&Play. No configuration required
- Reliable and great value
Specification
Technology
| Network Standards | - IEEE802.3i 10BASE-T
- IEEE802.3u 100BASE-TX
- IEEE802.3x Flow Control
- IEEE802.3af/at Power Over Ethernet
|
| PoE Power | - 15.4W/25.5W per port(IEEE802.3af / IEEE802.3at)
- Wiring: Data & Power provided over pairs 1/2 and 3/6 or 4/5 (+) and
7/8 (-)
- Cable: UPT cat.5 or higher
|
| Processing Types | - Sotre-and-forward
- Half-duplex back pressure and IEEE 802.3x full-duplex flow control
|
| Address Database TableSize | |
| Buffer Memory | - 48Kb embeded memory per unit
|
| Network Latency | - Less than 20μs for 64-byte frames in Store-and-forward mode for
100Mbps to100Mbps transmission
|
Power:
| Input | |
| PoE Power Consumption | - 15.4W/25.5W per port(IEEE802.3af / IEEE802.3at)
|
| Overload Current Protection | |
Mechanical:
Interface:
| LED Indicators | - System: Power, PoE maximum power
- Per ports: Link, Activity, Speed, PoE active, PoE error
|
The application of 4 ports POE switch:
