PS Plate (Printing Plate,Presented Plate)
Product specification:
Positive PS Plate (Pre-Sensitized Plate)
Thickness : 0.15mm-0.30mm, most commonly used: 0.15mm, 0.20mm,
0.27mm, 0.30mm
Charastics of our plate:
1. Multiple graining layer with fine structure, high resolution and
good tone .reproduction.
2. Good sensitivity,good developing latitude, good exposure ability
and fine water receptivity.
3. Oxidation layer ensuring good water retaining and durability.
4. Gas leading layer reducing the time required for evacuation and
preventing the formation of an indistinct image during printing.
Production feature:
Electrolytic process ensures that the graining cells of the plate
are well distributed,the ballace of water- ink reached rapidly and
maintained in the printing .
Oxidation process makes the aluinum substrate hard and durable,
which is greatly improve water retaining and durability of the
plate.
PS PLATE GUILDE
Adopting Japanese KOYO coating production line and imported fine
aluminum coil, our PS plate is stable in quality and excellent in
performance.
Our plate has
1. High sensitivity,good developing latitude and good water
receptivity.
2. Multiple graining layer with fine structure, high resolution and
good tone reproduction.
3. Oxidation layer ensuring good water retaining and long press
life.
4. Gas leading layer reducing the time required for evacuation and
preventing the formation of an indistinct image during printing.
Recommended Guide
A. Exposure
1. In actual usage, user shall decide the appropriate exposure time
according to the light type, power, lights new or old degree and
focus of the light.
2. The soft plate density shall not less than 3.8
3. If user uses 13 grade continuous tone step scale/Gradient to
decide the optimum time of exposure, the color plate shall be
exposed to 0.6 (grade 4), proofing plate shall be exposed to 0.45
(grade 3)
4. After preliminary decision on the exposure time, user operates
exposure, development, observe if 2% tone and 10um component of
forces are adopted well to each other, then make rectification or
settle sown.
5. For example: 3KV UV light, 1.0m light focus, brand new light,
the right exposure time shall be 60S+/-10S
B. Development
1. Using our PS plate development powder, put every bag of powder
(500g) into 10L (10kgs) pure water, after complete resolve, it can
be normally used.
2. Using our PS plate liquid, put each bottle of dense liquid into
pure water of 5 more times. If using manual development, the
proportion of dense liquid and pure water can be 1:6
3. When making development liquid, user must mix it radically, if
not use the liquid immediately, user shall store into sealed
container to avoid invalid.
4. Development temperature is 23C +/- 2C, too high temperature may
harm the oxidized surface of the plate, thus caused dirty of the
plate and reduce reproduction of the plate ability.
5. Development time is 30 second, with the development times
increased, development ability reduces, then user shall prolong the
development time and make replacement when necessary.
