Gel TechnologyDeep Cycle Design
Maintenance-Free RechargeableSealed Valve Regulated
Range from 12V18AH to 12V250AH12 Years life design
Feature in details
Long life design
12V Gel series of AoKu batteries are long life design batteries.
Normally in the alloy of plate, the percentage of Tin is 8%. For
this batteries, we double the percentage of Tin in the alloy. Also
we change the percentage the percentage of Ca in this alloy.
Valve Regulated Construction (Sealed)
12V Gel series of AoKu batteries are of the AGM (Absorbed Glass
Mat) valve regulated (sealed) lead acid rechargeable type. The
electrolyte is suspended in a specially formulated non woven glass
mat separator. All the electrolyte is absorbed in this manner and
provides a safe non-spillable battery
Gas Recombination System
The gasses generated in the normal charge/discharge use of a
rechargeable battery are internally recombined during normal
operating parameters. In the fact in normal operational use, more
than 99% of the gasses generated are recombined.
Safety and Automatic Valve System
If the pressure is over 2-5 psi the safety valve will automatically
open and reseal. This promise that there is no any excessive
accumulation if gas in the battery.
Heavy Duty Grids
The grids are made by heavy duty lead calcium tin alloy. This
provides: Safety margin of performance condition, Excellent
recovery capacity from deep discharge, Extra service life in either
cycle or float application, Low self-discharge when it is not in
working.
Float Service life of battery
12V Gel series of AoKu batteries is designed for float life of 10
years at 20°C(68°F).
Operation in any position
Because AoKu batteries are sealed and all the acid is absorbed in
the special separators, these batteries can be operated in both
vertical and horizontal position.
Wide Operation Temperature Range
AoKu batteries can be used in wide temperature range from -35°C to
45°C.
Available in flame retardant ABS material for the battery case V0
AoKu batteries cases can be make by flame retardant material V0. It
depends on the requirement of customer.
ApplicationSpecification of 12V Gel series
Uninterruptible Power Supplies (UPS) Voltage: 6V, 12V nominal
Telecommunication Plate: Lead calcium grid alloy
Switch-gear operations (High percentage of Tin in this alloy)
Cellular radio Case & Cover: ABS (Available for flame retardant V0)
Computer power supply Electrolyte: Dilute sulfuric acid
Standby power supply Specific gravity: 1.300
Photovoltaic Vent: Self sealing—2psi Operation
