Magnesium Flexible Anode Rod For Water Heater , Prevent Corrosion
Performance
1. anode rod for water heater
2. Standard:
ASTM B 843-1995
3. Application of our magmesium anode rod:
Water Heater,Water container,Pre-polarization of steel structure in
seawater,Gas pipe,Anticorrosion of steel and iron structure where
high resistant and electrolyte(soil and water) existed.
Flexible Magnesium anode / aluminum anode rods are designed for those limited spaces where a straight anode rod
will be unable to be inserted into the water heater due to limited
access directly above, such as low ceilings, closets, attics, under
stairwells or in basements. Just bend the anode rod at its flexible section return it back to straight once inserted into your water heater, boiler, etc.
Anode rods are the most important line of defense in preventing
corrosion and leaks in your water heater. These devices work
because the metal in the rod is sacrificed so the tank does not
corrode. As the anode works, the life of the water heater is
increased. The anode should be checked and replaced every couple of
years.
Segmented Flexible Magnesium /Aluminum Anodes are usually used in a small diameter anodes requirement,such as
for water heaters,boilers,water storage tanks,heat plumbing,gas
stations CP systems. This anode is of the highest quality and will fit most Haier,
Rheem, Vulcan, Dux, Rinnai and many others.
Contact us for details:
Vivian Jiang
-----------------------------------------------
China Hunan High Broad New Material Co.Ltd.
70 Chezhan North Road,Changsha, China 410100
Tel:+86-731-85717705 Fax:+86-731-85716569
Mobile/Whatsapp: +86-139-7488-3816
Email: vivian@hbnewmaterial.com
Skype: vivian.jjy
