Thermoelectric Air To Plate Cooler ATP040 12VDC Peltier Cooler For
Disinfection Purification
Peltier Plate Cooler ATP040-12VDC
Heat transfer, cold side : Plate
Heat transfer, hot side: Air
Cooling Power : 40W (delt T = 0)
Voltage, normal (VDC) : 12 , Vmax=15
Current : Initial 4.6A +/-10%
Current : Normal 3.9A +/-10%
Fan, cold side: N/A
Fan, hot side: 92x25mm, 12VDC, 0.24A
Operating temperature: -10 ~ 55 degree C
Weight : 0.75kgs
Peltier module (TE), also called Peltier cooling device, is a heat
pump.
Peltier module is for the operation of DC current.It can
refrigerate while heating. By changing the DC current to determine
the polarity of the same refrigeration unit to achieve cooling or
heating. This effect is produced by the thermal principle, the
following plan is a single-chip device in refrigeration, It
consists of two ceramic composition, which is between N-type and
P-type semiconductor material (bismuth telluride). Semiconductor
components in the circuit is used in series form integral link
Peltier modules, the working principle is this : When a N-type
peltier element and a P peltier element combining into galvanic
right.In this circuit connected to DC current, can create energy
transfer. N-flow components of the P-type connector components
absorb heat as cold-end P-flow components of the N-type connector
components release heat as hot end. Endothermic and exothermic by
the size of the current size of semiconductor material N, P
components of a few to decide, Following is thermoelectric cooling
effect.
1, Seebeck effect (SEEBECK EFFECT)
1822 German Seebeck found that when two different conductors
connected, If connecting two different points in the temperature,
in a conductor temperature generated EMF :
2, Perle reads effect (PELTIER EFFECT)
1834 French Perle note found with the effects of Seebeck effect,
When current flows through the formation of two different conductor
of the tap, tap will produce exothermic and endothermic, exothermic
or endothermic current size by the size of a decision.
