125V 150A PLC Control Anodizing Power Supply Air Cooling IGBT
Rectifier
125V 150A DC anodizing PLC control air cooling igbt rectifier is widely used in aviation, aerospace, weapons, railways,
electricity, electronics, copper, aluminum, sewage treatment,
automobile manufacturing, shipbuilding, oil and other fields
• Anodizing: anodizing, hard anodizing
• Waste water treatment • Other DC Power Supply application field
• Recovery of Copper, Cobalt, Nickel, Cadmium, Zinc • and Bismuth
from Electrolytic Copper Solution
GENRAL SEPCIFICATION 125V 150A DC anodizing PLC control air cooling
igbt rectifier
| AC Input | voltage | 415V |
| frequency | 50/60hz |
| phase | 3 phase |
| output | current | 0~5000a optional |
| voltage | 0~125V adjustable |
| frequency | 40khz |
| effiencicy | ≥89% |
| voltage stability | ≤1% |
| current stability | ≤1% |
| Stabilization mode | Current stabilization/Voltage stabilization (Switchable easily) |
| adjustment range | Voltage/Current from 0-100% continuously adjustable within rated
range |
| control part | cooling system | air cooling /water cooling/mixed water & air cooling |
| control method | local panel control/remote control box/ PLC |
| Display contents | Voltage meter/Current meter/Working/Over temp/Error, etc.. |
| Protection method | Input over voltage/Under voltage/Over current/Output short/Over
heating self protection etc. |
| use environment | Operating temperature | -20-50℃ |
| Ambient temperature | 30-65℃ |
| Ambient humidity | ≤90% |
| Working loading | Full capacity operation, more than 1,000 meters above sea level,
reduced load operation |
OPTIONAL FEATURE for 125V 150A DC anodizing PLC control air cooling
igbt rectifier
| Reduced Ripple | Ripple is the amount of AC that appears as voltage fluctuations on
the DC output. Because some metal finishing applications cannot
tolerate excessive ripple levels, We offers power supplies with
ripple as low as 3% of the operating set point |
| Polarity Reversing | manual reverse or automatic reverse |
| Digital Ampere-Hour / Minute Meter | achieve the current hour,current minute control,achieve the
chemical solution automatically add |
| Computer analog Interface | 0~10v,4~20mA,0~5V interface,achieve remote control for the125V 150A DC anodizing PLC control air cooling igbt rectifier ,saving the cost |
| PLC +HMI control | RS 485,Profibus,Profinet international standard interface |
| multi-period Timer | Timers are available to turn the rectifier off, sound an alarm,
illuminate a light (or any combination) at the end of a process
cycle |
Cabinet: all the125V 150A DC anodizing PLC control air cooling igbt rectifier cabinet adopts magnetic cut links, reduce eddy current losses, and
cabinet as a whole spray painting | Structure: 125V 150A DC anodizing PLC control air cooling igbt rectifier with reasonable structure design, isolated the inverter part and ,
rectification part , convenient to disassemble and maintenance |
Radiator: radiator capacity expanded 1.5 times,make sure better cooling
effect | switch control way: adopt full bridge phase shifting soft switch,reduct IGBT loss,save
engergy |
Main transformer: 125V 150A DC anodizing PLC control air cooling igbt rectifier adopts amorphous core,increase transformer efficiency,reduct the
transformer temperature rise,cut the rectifier weight,improve the
power supply stability, reliability | Core & Schottky diode: core capacity expanded 1.5 times schottky diode expands 4 times
|
Board : all control boards did anticorrosion treatment with imported three
defense lacquer | IGBT: IGBT capacity expanded 3 times,make the power supply more reliable |
