Automatic FRP 6TPH RO Water System Electrolytic Reverse Osmosis
Water Treatment System For Mineral Water
1. Product Description
RO (Reverse Osmosis) Water Treatment Plant :
Production Capacity ranges / flux: from 1500GPD (0.25t/h) to 3,000,000 GPD (500t/h).
Reverse osmosis (RO) technology known as hyper filtration, is
widely used in Cosmetic, Pharmaceutical, chemical industries, food,
drinking water.
RO equipment is the most advance and energy saving in water
treatment industry.
Our company SCxixi can supply all kinds of OR water purification
appliance.
RO Plant Working Principle :
With higher pressure than that of solution osmotic pressure, the RO
meberance seperate water with saline.
Because the aperture of RO membrance is very tiny, it's diameter is
about 0.00001μm, in this case water can go through the special RO mebrance but
other materials can't . We can get pure water, ultra-pure water to
meet differents demands in different lines, different users with RO
treatment plant.
2. Product Parameter
| KYRO-6000LPH RO Water Treatment System: |
| 1. Capacity: 6000L/H |
| 2. Rated power: 9.5KW/H |
3. RO System Rack Size: 3000*900*1800MM |
| 4. Desalting rate:>=97% |
| 5. Water recovery rate: 50-75% |
6. Voltage: 380V 50Hz 3phase |
3. Component
There are several kinds of consumables you need to replace
regularly. (5000LPH)
a. Quartz sand: replaced about every 15 months. 50kg/bag, 1300KG/set , 26bags total
b. Activated carbon: replaced about every 15 months. 25kg/bag , 375KG/set , 15bags total
c. PP Filter cartridge: replaced about every 1 month. 9pcs/set
d. Ro membrane: replaced about every 2 year. 5pcs/set
We suggest you buy 1- 2 years of PP filter cartridges together with machine. Because these PP filter cartridges need to
replace every month.
4. Optional Components
A. Regulating wheels
B. PC Touch Screen
C. Two-stage RO system
D. PH adjustment
E. CIP cleaning system
F. Auto or manual control valve
G. U-PVC or stainless steel pipe
H. UV sterilizer/Ozone Generator
I. Dosing system(anti-scale)/Water Softener
J. PE or stainless steel raw/pure water tank
K. FRP or stainless steel pre-treatment tank
Main Processing Design:
Raw water pump→ Silica sand filter → Activated carbon filter→Water
softener → Security filter→ High-pressure pump→ 1st RO system... (See flow chart below)
1. Raw water pump: provide the pressure to silica sandfilter/active
carbon filter
2. Silica Sand filter: get rid of turbidity, suspended matter,
organic matter, colloid and so on
3. Activated Carbon filter: Remove the color, free chloride,
organic matter, harmful matter and so on
4, Softener: Get rid of calcium and magnesium ions in original /
source water, reduce water hardness.
5. Security filter--prevent any deposition of large Particles, most
of the bacteria, and viruses into the RO membrane, The accuracy is
5um, for holding back any large particulates such as large iron,
dust, suspended matter, impurity.
6. High pressure pump-- Provide the high pressure to RO membrane(at
least 2.0 Mpa).
7. RO system--RO system is the main part of pure water treatment
plant. The desaltation rate of RO membrane's can be as high as 99%,
it is capable of removing over 99% of ions, bacterias, particles
and 98% of organic.
If any interests & any questions just feel free to buzz me
anytime^-^
