Punching Mould Tools Carbide Bar Stock / Grey Square Carbide Blanks
Introduction of Carbide Wear Strips
Carbide Wear Strips is a sintered metallurgical product of powder form. It is
manufactured in vacuum or Hydrogen reduction furnace with
refractory tungsten material (WC) micron powder as the main
ingredient and Cobalt (Co), Nickel (Ni) or Molybdenum (Mo) as the
binder.It has many excellent characteristics such as high hardness
and strength, good wear and corrosion resistance and salient
stability under high temperature (even at 500 ºC it is essentially
unchanged and at 1000 ºC it is still of high hardness). We supply
several types of tungsten carbide strips: strip with angle, round
strip and cemented tungsten carbide strip
Tungsten Carbide Round Bar Description:
Applications of Carbide Wear Strips
Carbide plate is a highly efficient and green material, which
features qualities of stainless steel: Corrosion resistance,
oxidation resistance, wear resistance, bonding proof and acid-base
resistance; And ensures its good strength, toughness, bending and
stretching, impact resistance.
Tungsten carbide strip is used for woodworking cast iron cutting
tool. It can be used in many field such as woodworking, machining
of refractory alloys, stainless steel, high manganese steel, for
processing cast iron, non-ferrous metal and aluminum section bar,
etc
| GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
| RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood
or nonferrous metal, ceramic and other alloys. |
| RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation.
Suitable for rosewood, solid wood, pinewood, and other wood with a
lot stammer. |
| RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal,
ceramic and other alloying, semifinishing of of hardwood,
chipboard, MDF and HDF. Better to use silver soldering. |
| AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger
jointing tool.
|
Common specification sheet
| (T) | (W) | (L) |
| mm | mm | mm |
| 1~3 | 3.5 | 50~320 |
| 1~4 | 4 | 50~320 |
| 1~5 | 5 | 50~320 |
| 1~6 | 6 | 50~320 |
| 1~7 | 7 | 50~320 |
| 1~8 | 8 | 50~320 |
| 1~9 | 9 | 50~320 |
| 1~10 | 10 | 50~320 |
| 1~11 | 11 | 50~320 |
| 1~12 | 12 | 50~320 |
| 1~13 | 13 | 50~320 |
| 1~14 | 14 | 50~320 |
| 1~15 | 15 | 50~320 |
| 1~16 | 16 | 50~320 |
| 1~17 | 17 | 50~320 |
| 1~18 | 18 | 50~320 |
| 1~18 | 19 | 50~320 |
| 1~18 | 20 | 50~320 |
Advantage of Carbide Bar Stock
1. Superior heat stability.
2. Anti-deformation in high temperature.
3. Fine thermal shock resistance.
4. High thermal conductivity.
5. Excellent Oxidation control ability.
6. Strong anti-corrosion in high temperature.
7. Good corrosion resistance from Chemical.
8. High-wearing feature.
9. Long usage lifetime.
