Duplex 2205 Wedge Wire Resin Protect the Water Distribution Line
1. Why we need resin trap?
When the resin is used for on-line water treatment, when the
quality of the resin is poor (strength is insufficient),
the water pressure disturbance is large (especially high pressure
disturbance), and the resin cylinder wall is damaged.
The resin will enter the whole water system, which will affect the
normal operation of other equipment of the system.
Therefore, resin traps need to be installed. Resin trap is mainly
to install a filter with much smaller aperture than resin in the
water system pipeline near the outlet of equipment equipped with
resin, such as ion exchanger, and has flushing function.
When the resin passes by, it can be intercepted and captured by the
filter.
At the same time, the captured resin can be discharged out of the
system by automatic flushing through the differential pressure
between front and back.
Lehler wedge wire resin traps can can prevent loss of resins and
keep the costly media in place.
It is not only to prevent the loss of costly medias, but also to
avoid damaging downstream equipment.
Lehler design and manufacture resin traps according to the exact
media particle size.
Lehler design and manufacture resin traps resin in a wide variety
of materials and sizes.
2.Details pictures of Resin traps:
3. Lehler resin trap Benifits?
| Lehler resin trap can prevent loss of resins and keep the costly
media in place. |
| Lehler resin trap can prevent the damage to the pipe fittings. |
| Lehler resin trap can prevent the environmental damage. |
| Lehler resin trap can prevent cross contamination of resins. |
4. Advantages of resin traps?
- Non-clogging construction: The v-shaped wires and support rods is welded together by
automatic resistance welding, which ensures a two- point contact between the particles and the
slot,which minimizes clogging of near size product.
- Strong construction: for most applications the wedge wire is self-supporting because of
the welding at each intersection and can therefore withstand high
pressure(Psi) and heavy loads.
- Smooth Surface Filtration: very good smooth filtration surface, which reduce mechanical wear.
- High-precision slot opening: Minimum Slot opening is 20 microns.
