Performance and Characteristics
1.The built-in continuous rotating infeed system effectively
reduces the space occupied. The consistency of preform position
stream lines the process.
2.38mm pitched, more preforms are uninterruptedly heated within the
same distance, which can improve the efficiency and 30% energy
saving.
3.Hinged oven holders make it easy for the operators to change
infrared tubes and do the maintenance.
4.The preform transfer system with grippers and the variable pitch
system are both driven by the servo motors to ensure high speed and
accurate preform handling between the two mechanism.
Technical Parameters
| Items | UNIT | DY-8CR600S | |
| Molding Specification | Clamping force | kg | 70000 | |
| Clamping stroke | mm | 120 | |
| Stretching stroke | mm | 250 | |
| Bottom Stroke | mm | 30 | |
| Cavity space | mm | 76 | |
| Number of cavities | pc | 8/4 | |
| Bottle Specifications | Max Bottle volume | L | 0.75/1.5L | |
| Max Neck Diameter | mm | 18～30 | |
| Max Bottle Diameter | mm | 70(8cavities) 106(4cavities) | |
| Max Bottle Diameter | mm | 320 | |
| Bottle Preform Heating Carriage Space | mm | 38 | |
| Max Production Capacity | BPH | 18000 | |
| Main Motor Specification | Rated power | KW | 110 | |
| Power consumption | KW | 35～50 | |
| Compressor Specifications | Blowing Pressure | Kg/c㎡ | 28～32 | |
| HP Air Consumption | m3/min | 10 | |
| Cold Water Specifications(Chiller) | Operating Pressure | Kg/c㎡ | ≥4 | |
| Temp range | ℃ | 5-20 | |
| Chilling Capacity | kcal/hr | 21100 | |
| Cold water flow rate | L/min | 70 | | Kg/c㎡ |
Cooling Water Specifications (Cooling tower) | Operating pressure | Kg/c㎡ | 3 | |
| Temperture range | ℃ | ≤37 | |
| Cooling water flow rate | L/min | 85 | |
| Main Machine Specifications | Main Machine size (L*W*H) | mm | | |
| Main Machine Weight | Kg | 8500 | |
| Whole Machine Specifications | Whole Machine size (L*W*H) | mm | | |
| Whole Machine weight | Kg | 9500 | |
Note:
1.The actual capacity depends on the preform quality and bottle
shape.
2.Due to continuous technical development specification would be
improved without prior notice.
3.Special designs correspond to customers needs.
Machine Configurations
| Item | Items | Brand |
| 1 | PLC | Omron, Japan |
| 2 | Touch screen | Omron, Japan |
| 3 | Servo motor | Omron, Japan |
| 4 | Reduction drive | Newcarter (Germany) |
| 5 | HP blow valve (Air Source recovery system) | Sechi (Switzerland) |
| 6 | Acting cylinders | SMC(Japan) Or Lishi (Germany) |
| 7 | operating valve | PAKKER (USA) |
| 8 | Control button/ intermediate relay. | Omron, Japan |
| 9 | Ac contactor / thermal relay. | Schneider (France) |
| 10 | Intelligent Voltage regulator. | Omron, Japan |
| 11 | Silicon Controlled Rectifier | SEMIKRON, Germany |
| 12 | Infrared tungsten lamp tube. | LIANGGU, Zhejiang |
Note : Due to the upgrading of models, the actual configuration may
be inconsistent with above form. Some parts may be replaced by
other brand parts which in equivalent price and grade.
HP Air System Model: 52SH-2.0/40
“HENGDA”COMPRESSOR, 52SH-2.0/40 MOD,reciprocating, stationary,
in“W”frame arrangement, balanced, single-acting, three stage
compression, with crossheads, air-cooled, with cylinders
lubrication, equipped with:
TECHNICAL FEATURES
Compressor model 52SH-2.0/40
Fluid to be compressed AIR
Speed rpm 690
Discharge pressure bar(g)40
Effectively produce volume Nm3/min 2.0
Minimum electric motor power kw 22
Stroke mm 146
1st stage cylinder dia. mm146*2
2nd stage cylinder dia. Mm108
3ir stage cylinder dia mm 59
Dimension(L×W×H)) mm 1800*1120*1110
Weight kg 660
Delivery connector 11/2”NPT
Q: What can I do if I haven't gotten any clue of the production
line? I just wanna open a factory and to do the business.
A: Don't worry about this; You can inform us:
1, the exact production you wanna deal with;
2, the budget of the production line; If no budget of the business,
I will send you the popular machine in our factory for your ref;
3, we will help tp design everything including the machine layout
and factory layout;
Q: This is the first time I cooperate with your factory. How can I
trust you about the machien quality?
A: Before ordering the machine, we will make the offer very clear.
For example, the material thickness, the brand etc. We can have the
video call and I will show what we have in the factory;
Also you can visit us to see the machine;
Q: If the quality doesn't meet my requirment, how can you solve
this problem?
A: Before ordering the machine, we will negotiate the machine
inspection standard. Then start production; If you are not
satisfied with the quality, show us, we will re-do it before
shipping;
Q: Can I run the machines in your factory if I buy the complete
line in your factory?
A: Sure, why not. We will have the line connected and tested in our
factory before shipping even you didn't mention; We will make it
working before arriving at your factory;
Q: How can I get the machine?
A: Our company have the export license, so we can help to ship the
machine to discharge port that you are available.
