Cemented carbide turning tools carbide tips hard metal carbide
lathe cutter tools CNC parting
off inserts MGMN200-G
General information:
A tungsten carbide parting insert is mainly performed in bar feed
machines, often used in mass production with proicess parting off,
pls refer to the pictures:
The high toughness substrate with TiAlSIN coating of ultrafine
grain size ,are universal and suitable for the processing of
stainless steel and high temperature alloy.
Models introduction:
Specification | Grade |
Description
| Coating |
| MGMN150-G | YP730 |
High toughness substrate and ultrafine grain size are suitable for
light and medium load milling of all kinds of processed materials
as well as finishing and semi finishing of stainless steel and high
temperature alloy.
| PVD coating |
| MGMN150-G | YP730 |
High toughness substrate and ultrafine grain size are suitable for
light and medium load milling of all kinds of processed materials
as well as finishing and semi finishing of stainless steel and high
temperature alloy.
| PVD coating |
| MGMN200-G | YP731 |
The high toughness and ultrafine grain size ,are universal and
suitable for the processing of stainless steel and high temperature
alloy. | PVD coating |
MGMN200-G | YP731 |
The high toughness substrate and ultrafine grain size ,are
universal and suitable for the processing of stainless steel and
high temperature alloy.
| PVD coating |
Contrast Advantage/Benefits of choosing tungsten carbide inserts:
1. Tungsten carbide insert has new Cutting edge technology with better quality and longer tool life.
- Excellent surface finish on the workpiece
- Improved adhesion and insert chipping resistance
- Stable and extended tool life in continuous and interrupted cutting
operations
2. Advanced production machine ensure stable excellent quality
- Spay dry tower ensure well grain size
- Cutting edge well honed
- Parallel surface grinding ensure a insert’s presicion
How to choose parting inserts?
First choice for parting off
One- and two-edge solutions should be considered as the first
choice for different parting off operations. Use inserts which are
designed to produce chips narrower than the groove.
Shallow parting
For shallow parting (diameters ≤ 12 mm (0.47 inches)), use 3-edge
inserts for economic parting in mass production.
Medium parting
For medium parting (diameters ≤ 40 mm (1.57 inches)) use
screw-clamp and spring-lock holders with 2-edge inserts.
Deep parting
For deep parting (diameters ≤ 112 mm (4.41 inches)), insert
stability is crucial as this type of cut places high forces on the
insert. Hence, a blade with a stable spring clamp and a single edge
insert is the best choice.
Pip and burr free parting
For pip and burr free parting, use a sharp geometry with small
corner radii. A front angled insert will also reduce pip and burr.
Front angled inserts will create side forces and are recommended
only for short overhangs (<13 mm (0.51 inch)).
Small part machining
For small part machining, use an insert with the smallest width and
sharpest cutting edges. For best process security, use a tool with
precision coolant. If superior tool edge sharpness is not
necessary, choose a 3-edge or 2-edge insert for a more economical
solution, or for larger diameters.
Quality control:
Technical support and after-sale service:
Our company can providing the following technical service for
customers:
1. Recommending more suitable processing parameters.
2. According to the workpiece design, material and CNC machine feed
rate, cutting speed we can recommending a full set of practical
scheme.
3. Suggsting more suitable model to replace the brands of Japan,
Korea and so on.
4. We can offer together with tool holder.
