CNC Lathe Parting Tools Carbide Grooving Inserts ZTED02503 ZTFD0303
ZTGD0404 ZTHD0504
General information:
Parting and grooving form a turning category over a wide range of
machining applications that require dedicated tools. These tools
can to some extent be used for general turning.Grooves can also be
made through milling, due to the development of multi-task machines
and machining centres, which are used in combination with complex,
asymmetric components.
Models introduction:
Grade introduction:
| Grade |
Description
| Coating |
| YP730 |
High toughness substrate and ultrafine grain size are suitable for
light and medium load milling of all kinds of processed materials
as well as finishing and semi finishing of stainless steel and high
temperature alloy.
| PVD coating |
| YP731 |
The high toughness and ultrafine grain size ,are universal and
suitable for the processing of stainless steel and high temperature
alloy.
| PVD coating |
MG chipbreaker has excellent performance
How to achieve good quality
Good quality in parting and grooving is mainly dependent on the
tool system and its behaviour with the cutting material.
However, tool maintenance is also important for the final machining
result.
1. Tool, insert geometry and grade affect the cutting quality.
Wiper inserts improve the surface finish.
2. Use correct feed rates for the insert and the material.
3. Use a tool holder with a short overhang to avoid vibrations, use
a sub-spindle if available.
4. Chip breaking and chip evacuation must be satisfactory.
5. Maintain the tools. Change the insert clamping screw regularly.
Use a torque wrench.
6. Establish a pre-determined tool life program.
Tool life in parting and grooving
Predictable and consistent tool life is essential for successful
parting and groving. However, it is difficult to set any values for
this because tool life depends on several factors. The tool life
can be optimized by the:
1. use of correct geometry and cutting data for the operation
2. use of coolant
3. correct set-up for the operation
4. reduction in feed at centre when parting off.
Technical support and after-sale service:
Our company can providing the following technical service for
customers:
1. Recommending more suitable processing parameters.
2. According to the workpiece design, material and CNC machine feed
rate, cutting speed we can recommending a full set of practical
scheme.
3. Suggsting more suitable model to replace the brands of Japan,
Korea and so on.
4. We can offer together with tool holder.
