Ship Berthing 3.3m * 6.5m Vulcanize For STS Yokohama Marine Fenders

Ship Berthing Pneumatic Rubber Fender 3.3m x 6.5m Marine STS Yokohama Fender

Marine pneumatic rubber fenders can be easily handled and installed with rope or chain because of its light weight. It can resist the shearing force and maintain energy absorption level under inclined compression . Meanwhile, it provides the low and comparatively even hull pressure.

Consisted of several synthetic tire cord layers and tough abrasion resistant outer rubber, they have consistent performance even under rough condition and cyclic load. The maintenance cost and damage risk are minimised also. The best material ensure the self-buoyancy and extremely long service life.

The advantages of pneumatic rubber fender

A. It use reinforced synthetic tire cord layers

B. Vulcanize without mold, strengthen the whole performance of the fender

C.It has high energy absorption and low reaction force

D.A Good adaptability to ship berthing connections

E.Can floating on the surface of the water, and apply for swaying.

Structure characteristics of the pneumatic rubber fender

LuHang pneumatic marine rubber fenders made of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.

1. The outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.

2. The reinforced synthetic tyre cord layers strong enough to maintain the internal air pressure of the fender.

3. The inner rubber layer seals the pressed air inside the fender.

Fenders equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.

Company

Luhang located in Jidong Industrial Park, Jimo City, Qingdao. We are a professional manufacturer of multi-purpose marine equipment including ship launching and landing airbag, pneumatic rubber fender, EVA foam filled fender, marine buoys in deep and shallow seas etc. Through many years’ development and accumulation, we have developed to a new high-tech enterprise with an integration of scientific research and design, product R&D,sales and technical service.

Initially established as Qingdao Luhang Marine Airbag Factory in 1988 and changed to Qingdao Luhang Marine Airbags and Fenders Co.,Ltd in 2011, Qingdao Luhang had been devoted itself to developing and manufacturing marine airbags and marine fenders for more than 2 decades.

The factory area is 56,000m² with building area of  21,000m². The company has registered capital of USD 3 million and fixed asset of USD1.2 billion. We have a full line of production equipment: rubber mixing machine, rubber roller machine, the China biggest vulcanization tanks, the biggest Press Inspection Machine, EVA foam processing machine, Foam shaping machines and SPUA spraying machine.

Through these years' development, we have full range of marine airbags and marine fenders:

Ship Launching Airbags for ship launching and docking in shipyards

Marine Salvage Airbags for salvaging sinked vessels or refloating objects from under water

Other Airbags for special usage

Pneumatic Rubber Marine Fenders for ships and docks berthing

Foam Filled Marine Fenders for ship and docks berthing

Fixed Dock Rubber Fenders for docks and wharfs

Marine Buoys

From the begginning we have been focusing on technological innovation. With a team of experienced technicans and engineers, we have developed some high tech marine products and got some petents. We have been approved as a supplier of Navy products. 

Quality is our life line. We provide service of “three guarantees” (returning, repairing and replacing) on all our products in case of any defects due to the problems of material,manufacturing, performance under conditions of normal operation and maintenance.