Inflatable Boat Lift Air Bags Boat Landing Airbag Synthetic Tyre Cord Layers

Marine Lift Inflatable Rubber Air Bag Size 1.2m to 12m Boat Landing Airbag

Products introduction

Ship lift air-bags, made of synthetic-tyre-cord layers, are also known as inflatable marine airbags, rolling airbags, lifting air bags, and salvage air bags. They are widely used in launching and landing ships, lifting and moving sunken ships, laying underwater pipes, building mandrels, etc. They have advantages in time saving, labor saving and cost saving. Airbags are safe, reliable and flexible, as well as environment friendly.

The constructure of the airbags are: inner rubber layer , middle reinforced tyre cord rubber layers, and outside protective rubber layer.

The outer rubber layer that covers the outside of rubber airbag to protect under layers from abrasion and other external forces. This compound has sufficient tensile and tearing strength to withstand any condition and hard usage.The inside rubber layer seals pressurized air inside marine airbags.
The synthetic tire cord layers are made of polyamid cord which commonly used on tires, that hold the internal pressure and distribute stress evenly. So they can provide strong efficient reinforcement for the airbags.

Performance Calculation Principle of Airbags

The bearing capacity of marine airbags was calculated based on the working pressure and contact area. Working pressure got upon the burst pressure and safety working factor.As the flexibility of marine airbag the contact area will be affected by some terms which include the carried ship condition, the different position from gravity center during the process of ship launching and pulling. So the bearing capacity of airbags will vary as well as the contact area.

Specification:

Initially established as Qingdao Luhang Marine Airbag Factory in 1988 and changed to Qingdao Luhang Marine Airbags and Fenders Co.,Ltd in 2011, Qingdao Luhang had been devoted itself to developing and manufacturing marine airbags and marine fenders for more than 2 decades.

The factory area is 56,000m² with building area of  21,000m². The company has registered capital of USD 3 million and fixed asset of USD1.2 billion. We have a full line of production equipment: rubber mixing machine, rubber roller machine, the China biggest vulcanization tanks, the biggest Press Inspection Machine, EVA foam processing machine, Foam shaping machines and SPUA spraying machine.

Through these years' development, we have full range of marine airbags and marine fenders:

Ship Launching Airbags for ship launching and docking in shipyards

Marine Salvage Airbags for salvaging sinked vessels or refloating objects from under water

Other Airbags for special usage

Pneumatic Rubber Marine Fenders for ships and docks berthing

Foam Filled Marine Fenders for ship and docks berthing

Fixed Dock Rubber Fenders for docks and wharfs

Marine Buoys

From the begginning we have been focusing on technological innovation. With a team of experienced technicans and engineers, we have developed some high tech marine products and got some petents. We have been approved as a supplier of Navy products. 

Quality is our life line. We provide service of “three guarantees” (returning, repairing and replacing) on all our products in case of any defects due to the problems of material,manufacturing, performance under conditions of normal operation and maintenance.