18W LED Microwave Motion Sensor Movement Detector White Bulkhead
Light IP65
DESCRIPTION
A quality bulkhead light for outdoor / indoor use with a hidden
microwave sensor. This fitting is perfect for porches , tunnel ,
stairs etc, the sensor switches on when you are near to guide your
way . Also great for installation in say a covered veranda if you
enjoy being in the garden at night or go out for somthing else.
IP65 weatherproof design, makes perfect wall light for shed and
garden , has the protection from splashed , sprayed and dripping water.
A hidden motion microwave sensor means this fitting is useful for
home and security , it is an ideal solution for where an low cost ,
energy efficient, low maintenance emergency light fitting is
required.
A factory stairs or dormitory corridor fitted microwave sensor
enable the light to be used on demand with motion detection.
18W Microwave Sensor Bulkhead
| Wattage | 18W |
| Work Voltage | 160-265V |
| Driver | Non isolated |
| Color Rendering Index | Ra>70 |
| Application | Bathroom, lobby, basement, shed,garage, car parking , tunnel |
| Color Temperature | white (6000-6500K) / warm white (3000-3500K) |
| Light Source | 2835 SMD |
| Luminous Efficiency | 80-90lm/w |
| Detect Distance | 4m to 8m |
| Induction Time | 20 seconds |
| Beam Angle | 120°-140° |
| Light sensor start work | < 25lux |
| IP Rating | IP65 |
| Diffuser material | PP |
| Base Material | Alloy PP |
| Dimmension | Ø216*73mm |
| Finish color optional | White/Black |
| PCS/CTN | 20PCS |
| CTN Size | 47*39.5*47cm |
| Warranty | 2 years |
Specification
| Model | Wattage | Voltage | Dimmension (mm) | PCS /CTN | CTN Size (cm) |
| FCD-RMV-12 | 12W | AC160-265V | Ø162*65 | 40 | 67*36*36 |
| FCD-RMV-18 | 18W | AC160-265V | Ø218*73 | 20 | 47*39.5*47 |
Application
Perfect for indoor and outdoor lighting such as Lobby , Corridor ,
Baseroom ,Staircase , Warehouse , Hallway ,Garden , Tunnel ,
Foreyard , workshop, Patio , Car Washing Stations, and Parking Lot
etc.
Warning
1. Cut off the power before installation
2. Can be used as emergency light
3. Keep it away from flammable objects
4. The environment temperature of the lamp operation: -20Ċ~+50Ċ
5. Do not try to open this unit, it is sealed completely
6. Must install it by professional electrician
