LSW-160 160kw Electric Induction Heating Machine For Heating Steel
Bar/ Steel Tube
1. Main Features of IGBT induction heating machine:
1. High heating speed: more than 10 times higher than gas furnace's heating speed;
2. Less metal loss: the heating time is short, burning a small, compared to other
heating methods, significantly reducing the amount of metal loss;
3. Little room occupying: small furnaces, the volume can be reduced to the extent of only
three to five loading ingots, extrusion machines to meet production
needs;
4. Environmentally friendly: no environmental pollution, good quality metal billets heated;
5. Mechanization and automation: good working conditions, can reduce the amount of operators;
6. Well-controlled temperature: metal billet heating process, the spindle temperature control can
be achieved;
7. Low failure rate: can be configured side by side two induction furnaces (exchange
use), to avoid shutdown, improve production efficiency.
2. Brief introduction of IGBT induction heating machine:
Our high frequency induction heating machine adopts IGBT series and
parallel induction heating technology as the core. The induction
heating machine heats the work piece to a certain temperature, and
then cools it rapidly to change its machine structure to achieve
some special mechanic properties.
3. Features of IGBT induction heating machine: suitable for heating steel bars, pipes, plates and angle steels.
1. Be applicable to heating, quenching / hardening, etc.
2. IGBT technology as the core.
3. Environmentally friendly: no air pollution, no dust and little
noise.
4. Reduced operating cost: high automation, fewer operators needed.
5. Energy saving: high energy conversion.
6. High efficiency: Metal can be heated to its desired temperature,
even its melting point, instantly.
7. Duty cycle 100%: can work for 24 hours without a stop.
4. Technical Parameters of LSW-200 IGBT induction heating machine:
| Model | LSW-200 |
| Working Voltage | 380V, 50/60HZ |
| Max input power | 200kw |
| Oscillation frequency | 10-20KHZ |
| Duty cycle | 100% |
| Cooling water flow | 50L/Min,0.2MPa |
| Weight | 380kg |
| Dimension (L*W*H ) | 1070*640*1870mm / 870*530*600mm |
| Material | stainless steel |
| Color | support customized |
| Usage | metal heating,quenching etc |
5. Applications of IGBT induction heating machine:
(1) Heating: mainly for carbon steel, stainless steel, alloy, brass, aluminum, etc. heating.
(2) Forging: Whole and partial induction forging for metal bar.
(3) Workpiece hot forging and rolling: standard parts, fasteners, automobile parts, small hardware, round bar and billet, etc.
(4) Specific application for the induction forging heater: bolts
and nuts forging and hot upsetting, pipe induction forging and
forming, auto parts (connecting rod, crank shaft, etc.), cast iron
beam heating and continuous heating, oxygen bottle forging, rivet
heating, long / round / square / angle bar and billet heating, etc.
