High - Low Voltage Output , Microwave Motion Sensor Switch , On /
Off Control
Basic model for simple on/off control, compared to AC input
version, this 12V DC version sensor has smaller size, give less
shadow, at the same time, less expensive!
Features--
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≥25mA.
5V DC high-low voltage output signal.
Super compact, flexible to be integrated into any suitable
fixtures.
Dual-processor technology, real Lux-Off function for built-in
application.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
RoHS compliant.
Settings--
Detection range
Detection range can be reduced by selecting the combination on the
DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after
motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test
mode is mainly for users to choose the desired detection range. In
this mode, the daylight sensor is disabled, when there is no
motion, fixture keeps off, when there is motion detected, fixture
keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable
the sensor function.
"Disable”: The sensor works always, even during daylight.
"50lux, 25lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.
Detection pattern--
Lux-Off function--
Utilizing the Dual-processor technology, this sensor can tell the
difference of natural light and artificial light(lamp) from behind
the diffuser, then switch off automatically whenever the artificial
light is not required(ambient light is bright enough).
This is the REAL& INTELLIGENT lux-off sensor for built-in
installation.
Note: Lux-Off sampling time--30s
