RDCS Ductile Iron Swing Check Valve Hydraulic Cushion Double Flange Design

Hydraulic Cushion slow Closing Check Valve

Description:

The RDCS is a slow closing check valve with hydraulic cushion. The bottom of the body is equipped with micro-resistance slow closing device, when the pump stops, the disc will fall quickly, before full closure about 15% of the trip ,the disc will close slowly through the special device without water hammer happened. The RDCS is suitable for use in clean water and sewage system.

Features:

.Rubber disc adopts NBR/EPDM fully encapsulated method, that can provide better sealing and corrosion protection.

.Nylon lining into the disc to strengthen it, that can avoid fracture.

.The disc is located on the upper part of the fluid after opening the valve and can reduce damage.

.All cast iron parts are coated with epoxy.

.Simple design, easy opening the upper bonnet to do clean, replace, and maintain work.

.Complies with BS EN1074-3,BS4504, and BS EN558 distance of faces.

General Applications:
For general water supply, fire fighting,HVAC/ cooling & sewage system.

Usually installed at the pump outlet.

Material:

Alpine Flow Control (SuZhou) Co.,Ltd with major focus in the water valve design and manufacturing. The Management staff have over 30 years experience in the water valve design and manufacturing, combined with the high-tech electronics manufacturing experience of multi-national listed companies. This unique combination of traditional and high-tech industry management experience and skills have given us an advantage over the traditional valve manufacturer. More than 40% of our staff are technical staff with knowledge and experience in valve and mechanical design/manufacturing...

Proven and supported by on-going quality and reliability test. AFC has built it’s own in house reliability test laboratory to ensure that our products not only meet the international quality and reliability test specification such as the EN-1074-1/2 T-key and R-key test, but also comply to various international valves standards and specifications.
 

We already achieved WRAS certificate in 2011, and obtained FM approval in early of 2012,
and UL for gate valve. Today, we have got many international famous certificate for drinking water such as WRAS, NSF, AS, CE on certain products, and our product range has expended to double eccentric butterfly valve, rubber disc check valve ,non-slam check valve, both clean water & sewage water air valve, hydraulic control valve and penstock and we always focus on water system valves.
 

In 2018 year, our big plan is developing pressure management valves which has been proved to be a very helpful tool and economic way to save the leakage rate with limited investment and get a fast return in couple months and power savings

In addition, we have a special project team to focus on custom design and special requirement
 

Our Mission :
Be the market leader in Water Valve Flow Control
Company culture :
Technology through Innovation
Quality product and service through Quality people
Business growth through Cohesive partnership