5V Reverse Voltage 7 Segment Numeric Display 0.56 Inch For Smart Appliances

14mm (0.56 inch) red single digit common cathode 7 segment display

Application:

• Home and smart appliances
• Display time and digital combination
• Industrial and instrumental applications

• Numeric status

Selection guide:

Electrical / Optical characteristics at TA=25℃

Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.

Absolute maximum ratings at TA=25℃

Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.

Dimension: (mm)

Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01") unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

Technical data:

Recommended wave soldering profile:

Notes:
1. Recommend pre-heat temperature of 105℃ or less (as measured with a thermocouple attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath temperature of 260℃
2. Peak wave soldering temperature between 245℃ ~ 255℃ for 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85℃.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
7. During wave soldering, the PCB top-surface temperature should be kept below 105℃.

ANYO is the leading supplier of electronic components. We were established in 2012, based in Ningbo (Close to ShangHai). Before establishment, we were lawful chief representative of EMDAS ELEKTRONIK in Turkey. We always get the qualified products with fast, easy ordering, short delivery time, and free technical help.

We have our own carbon potentiometer factory, which is professional and has the ability to develop different kinds of potentiometers. We have our own trade mark and letter of patent for the structure.

We value every customer visit, which is a platform to show our profession and friendly. Because our corporate philosophy is to be a friend with you, not just business.

We attend professional electronic components exhibitions, which is most important to know the market trend, and gain the ability to help our clients expand their market and serve them better.

ANYO always pursuit of quality, not quantity. To ensure the quality, we only cooperate with qualified suppliers. Besides, our QC staff will control all shipments before loading.