Replacement Rinco Black Welding Head 70Khz for Smart Card
Implatable Antenna Machine
Description:
Ultrasonic antenna wire technology is a high speed system is
described by which copper antenna wires are embedded within an
array of smart cards that are manufactured on a plastic sheet so as
to lie in electrical contact with electronic chips that are mounted
on respective cards. The system includes a slide assembly that
carries an ultrasonic actuator. The tip of the ultrasonic actuator
is connected to receive a supply of ultrasonic energy for melting a
plastic card to form a path in which an antenna wire is to be
embedded. There is a channel formed in the tip of the ultrasonic
actuator through which a run of the antenna wire is fed so that an
antenna may be installed at high speed directly within the path
burned in the card.
Specifications:
| Type | QR-W70D |
| Frequency(KHz) | 70KHz |
| Trigger | External control |
| welder head | Titanium Alloy Material |
| Threading hole | Φ0.3mm or Φ0.5mm |
| Power code | 5M |
| Generator | Digital generator |
| Generator Size | 155*265*170mm |
| Cover dimension | Φ16X121mm |
| Cover material | Aluminum |
| Cooling way | compressed air cooling (Φ4mm conduit) |
| Speed | 0.1-0.3m/s |
| Thread fixed cycle | length 60000 m/s |
Features:
1. Main features Intelligent search frequency: automatic frequency
function to extend the life of the plug.
2. Installation method: single cabinet, combination cabinet, can
control eight embedding rods to work at the same time.
3. Control mode: multi-point point energy fine adjustment, external
PLC / computer signal control, easy to operate.
4. Button-on function: The welding energy can be adjusted according
to the thickness and hot-melt of the welding material, and the
operation is simple.
5. Self-detection function: fault display and error alarm signal.
6. Appearance: The body design is light, beautiful and durable, and
has good heat dissipation performance.
7. Stability: Long working hours, uniform energy output.
Compare with etching antenna technology:
Ultra-thin IC card is made possible by ultrasonic embedding
process.It will effectively solve the problem of the failure of
etching antenna technology in the application of ultra-thin IC
card, which can reduce the scrap rate and reuse cost.The ultra-thin
IC card produced by using the ultrasonic embedding process is the
same as the IC card manufactured by the traditional process, so its
average service life will be longer than the ultra-thin IC card
produced by using the etching antenna (6 years) process. Two
different processes, the material difference is mainly in the
antenna part, the antenna material used in the etching antenna
process is a PET (polyethylene terephthalate, PET) sheet with a
thickness of 0.078 mm and a precision etched aluminum wire, and
Ultrasound embedding process antenna for enameled copper wire, the
same production performance of an IC card, according to the
material price of etching antenna price is about 2 times the price
of copper, so the use of ultrasonic embedding process to produce
ultra-thin IC card The price is also slightly better. The mass
production of ultra-thin IC CARDS will have a profound impact on
the continuous development of the smart card industry.
Replacement Rinco Black Welding Head 70Khz for Smart Card
Implatable Antenna Machine
