5-12 Bar Dump Truck Hydraulic Controls HYVA 14750646H With
Indicator Light
Description
1. When used with a compatible tipping valve with proportional
lowering, the speed of descent of the body can be regulated by the
proportional movement of the air control lever.
2. The air control includes an electrical indicator to show P.T.O.
engagement.
3. The functions of Hyva air controls are clearly indicated on the
type plate.
part no. description
147 50 644 H control pneumatic - 2 - TF/LF - PN
147 50 646 H control pneumatic - 2 - TS/LF - PN
147 50 650 H control pneumatic - 2 - TF/LF - PA
147 50 652 H control pneumatic - 2 - TS/LF - PA
Explanation of codes:
2 = control has 2 sections
TF = lever is fixed in tipping end position
TS = lever has a spring return in tip position
LF = lever is fixed in lowering end position
PNL = P.T.O. control has no automatic disengage
P.T.O. control has a lamp
PAL = P.T.O. control has an automatic disengage
P.T.O. control has a lamp
Dimension
specifications
| Max. pressure | 12 bar |
| Min. pressure | 5 bar |
| Max. temperature | 80℃ |
| Min temperature | - 40℃ |
| Connections 1, 21, 22 , 23 | G1/8" |
| Connection 3 | M5 |
| Mounting holes | M6 |
| Voltage for lamp | 24V DC |
Attention
Use always rubber grommets to protect air tubes and to prevent that
dust and water enters the cabin.
For trouble free life of the entire pneumatic system the air system
must be free from water.
The air control should be mounted in such a way that:
1 it is easy to reach by the operator.
2 it is no obstacle when entering or leaving the cabin.
3 it is clear from any moving parts such as drivers seat and closed
door.
The air exhaust connection must be brought outside the cabin to
prevent air entering the cabin, which gives the following
disadvantages:
1 noise
2 blown up sand and dust
3 when alcohol is used to prevent the pneumatic system against
frost the alcohol vapour will enter the cabin
Make sure that air tubes:
1 are not too close to sharp objects.
2 are clear from moving parts.
3 are clear from exhaust and compressor lines.
4 can not get kinked.
5 are not too long.
Product show
Quality Standards :
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount , but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance , according to the original quality
standards , during warranty with product problems , need
confirmation testing by the manufacturer , the supplier to be
solved , the demand side due to storage , use, poor maintenance
caused by lower-quality product , and not raise objections
Samples
You can send a sample to customize the products, we have many
engineers can help it; If you want a product of mine, but you are
not sure if it's what you want, so you can ask for a sample from
me, it will be free.
After-sale service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
