1MW Solar Panel Ground Mounting System C Steel Support Frames
Solar Ground Mounting System is applicable to flat concrete roof
and a large array pv system in open terrain.
This system is designed to engineer with a minimum amount of
installed footing at greatly reduces labor.The special tilt-in
module,the clamp and the system can be modified to be installed
that make the installation easy and quick.
The customized length can eliminate the weld and cut onsite to keep
the high anticorrosive performance,the structure strength and the
appearance.
Benefits:
►Professional customized design
Products were designed by the experienced designers which have the
systematic design, stable structure, mature technology, can reduce
the difficulty of the installation on the most conditions.
►Easy installation
The pre-assembled design of the highest level in factory simplifies
construction site work to the largest degree and therefore
installation is simple and quick. It can effectively improve
construction efficiency, shorten construction period and reduce
construction costs.
►Safety
The racking systems can stand up to the extreme weather condition.
The main support components have also been tested to guarantee its
structure and load-carrying capacity.
►Widely application
The mounting system suitable for various kinds of project,
including residential project, commercial project, utility project
and so on.
►Great Compatibility
The Tianfon mounting system compatible with most of the major
framed and frameless PV modules on the market.
►Super quality
All products are made by experienced skilled staffs to operate
quality. With strictly full inspected and controlled by Qc
department.
Parameter:
| Product Name | Solar Ground Mounting System |
| Installation Site | Open Field/ Ground / Earth / Concrete Ground |
| Material | Steel Q235, Q245, Aluminum 6005-T5 |
| Color | Silver Or Customized |
| Wind Speed | 60m/s |
| Snow Load | 1.4KN/m2 |
| Module Angle | 10-60 Degrees According to Your Requirement or Latitude |
| Warranty | 10 Years |
| Service Life | 25 Years |
| Components Parts | Leg Cap; Front/Rear Leg; Fix Ring; Cross Pipe; U Connector; Rail;
Mid Clamp; End Clamp;Enforcement Pipe |
