High quality Small capacity 3000BPH Automatic mineral water/drinking/pure water
PET/Glass bottle filling Machine
The filling operation is faster and more stable because the micro
pressure filling operation of the new type is adopted. There the
output and benefit of the machine is higher than the machinery of
the same specifications. The advanced OMRON programmed controller
(PLC) is adopted to control the machine to run automatically while
a transducer is used in the bottle -entering chains to adjust
speeds and coordinated with the transducer of the main machine to
make the operations of moving bottle forward steadily and reliably.
Application: mineral water, drinking water, pure water.
Capacity: 3000bottles / hour (500ML)
Containers applied for: PET bottle of all volumes and shapes
Filling system: gravity filling
Features
Water Filling Machine is mainly used in the beverage filling
operations. The three functions of bottle wash, fill and seal are
composed in one body of the machine. The whole process is
automatic. The machine is used in filling juices, mineral water and
purified water in bottles made of polyester and plastics. The
machine can also be used in hot filling if being installed with
temperature controlling device. The handle of the machine can be
freely and conveniently turned to adjust the machine to fill
various types of bottles.
It is convenient to operate with higher automation because every
part of the machine is inspected to run with photo electricity, On
the bases, the filling parts of the machine can be changed into
filling methods of lower vacuum. The filling category of lower
vacuum (Z type machine) is applicable in glass bottles, filling
alcohol, soy and such like materials. The aluminum theft proof cap
and plastic cap can be adopted. The machine is an idea-preferred
equipment for beverage markets.
Product detailed
1. Rinser
Spring cramps are used in the bottle washing process. The empty
bottles can be turned over 180° Along the conveying rail. There are
two times of internal and external washing, the efficiency of
bottle washing is high.Bottle clip equipped with efficient spray on nozzle. The extrusive
droplet with 15° Angle ensures to wash all side of the bottle, and
can save the water.
2. Filler
The design of filling structure is reasonable and hygiene dead
angle, the run of equipment is stable, it can control the material
from the bottleneck, the control accuracy is within ± 2mm (subject
to bottle design). The filling valve material is SUS304. The
filling system has liquid level automatic control. Filling valve
lift is controlled by the valve elevator, after filling valve
contact the bottleneck, it start to fill. Bottle is conveying by
the wheel in the filling part
3. Capper
Screw capping machine is most precision part in the 3-1 machine, it
has a big influence to the goods stability and defective rate. Our
screw capping has following feature.
Technical Parameter
| Model RFC-W series | 14-12-5 | 16-16-5 | 24-24-8 | 32-32-10 | 40-40-10 | 50-50-12 |
| Washing-Filling-Capping | 14-12-5 | 16-16-5 | 24-24-8 | 32-32-10 | 40-40-10 | 50-50-12 |
Producing capacity
(600ml) | 2000-4000
(bph) | 5000-7000
(bph) | 8000-12000
(bph) | 12000-15000
(bph) | 16000-20000
(bph) | 20000-24000
(bph) |
| Applicable bottle (mm) | φ=50-108 H=170-340 330ml-2.25L |
| Pressure (kg/cm2) | 2~3 |
Outside vacuum
pump power (kw)
| Main motor
1.5kw | Main motor
2.2kw | Main motor
3kw | Main motor
4kw | Main motor
7.5kw | Main motor
9.5kw |
Overall dimension (mm)
(LxWxH) | 2100x1400
x2500 | 2460x1720
x2650 | 3100x2100
x2650 | 3500x2500
x2650 | 4600x1800
x2650 | 5200x4500
x3400 |
| Weight(kg) | 2500 | 3500 | 4200 | 5500 | 6800 | 7600 |
Configuration List:
Our factory
Shipping photo
