Cemented carbide strips are mainly made of WC tungsten carbide and
Co cobalt powder mixed by metallurgical method through powder
making, ball milling, pressing and sintering. The main alloy
components are WC and Co. The content of WC and Co in the carbide
strips used for different purposes is different, and the
application range is very wide.
1. For making punching dies. It should be applied to the production
of high-speed die and multi-station progressive die for punching
copper, aluminum, stainless steel, cold-rolled sheet, EI sheet,
Q195, SPCC, silicon steel sheet, hardware, standard parts, upper
and lower punches, etc.
2. For making wear-resistant tools. Such as woodworking industry
tools, plastic grinding tools.
3. For the production of high temperature parts, wear parts,
anti-shield parts. Such as the guide rail of the machine tool, the
anti-theft reinforcement board of the ATM.
4. Used to make corrosion resistant parts for the chemical
industry.
5. Radiation and corrosion resistant materials for medical devices.
6. The material properties of cemented carbide sheets for different
purposes are not consistent. When using, the hard alloy strips of
suitable materials should be selected according to the application
Note: Our company can produce alloy grades that are more suitable
for special processing fields according to customer needs.
Other non-standard specifications
| (T) | (W) | (L) |
| mm | mm | mm |
| 3~6 | 12 | 400 |
| 3~6 | 15 | 400 |
| 3~6 | 20 | 400 |
| 3~6 | 25 | 400 |
| 3~6 | 25 | 450 |
| 3~6 | 30 | 450 |
| 3~12 | 32 | 450 |
| 3~6 | 15 | 500 |
| 3~6 | 20 | 500 |
