top sell 3003 3105 5052 Aluminium Checker Plate | Aluminium Tread
Plate 5 Bar 3 bar
Aluminum checker plate is also called treadplates,because of its
raised patterns.
Tread plate—also known as floor plate, diamond plate, or diamond
tread plate—provides a durable, anti-slip surface for dock
surfaces, vehicle running boards, and more. Because it is highly
resistant to weathering, corrosion, and chemicals, tread plate
requires no maintenance or surface treatments.
ASTM A786 Tread Plate
Industrial Metal Supply offers steel tread plate that meets ASTM
A786 standards, and aluminum tread plate in 3003 and 6061 alloys.
Four styles are available.
5-Bar Tread Plate is defined by its unique pattern, with small,
individual blocks of five parallel bars oriented perpendicularly to
their neighboring blocks.
Tread Brite Tread Plate is the most common type of aluminum tread
plate, used for a wide variety of applications.
Embossed Firetruck-Quality (FTQ) Tread Plate is the same as Tread
Brite in all aspects, with the exception of a slightly modified
pattern that provides even better grip.
Mill Finish Tread Plate has a matte-finish diamond pattern, and is
used primarily in structural applications that do not require
bending.
Features
1, Damp-proof, anticorrosive, wearable and durable.
2, Has high strength, hardness, toughness and long service life.
3, Regular pattern on the flat aluminum sheet will not cause strong
light reflection and have a better vision effect.
4, Attaching the kraftpaper to the aluminum sheet can prevent
moisture, and therefore protect the sheet from oxidation. It also
plays damp-proof and antiseptic role.
Scope of Application:
5, It can be used for the protection of pipes, fittings and
equipments.
6, It can also be used for the jacketing of the equipments,
instruments and tanks.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
