358 anti-climb fence are challenging to penetrate and Weld strength
is 75% of the minimum tensile strength of the wire (tensile range
540-690 N per square meter). , with the small mesh aperture being
effectively finger proof and extremely difficult to attack using
conventional hand tools. 358 fences are recognized as one of the
most difficult to break through the barrier because it is difficult
to climb. It is called security fencing and high-strength fencing.
358 security fencing panel can be bent to enhance the aesthetic effect. While 3510
Security Fencing has many of the attributes of 358 anti-climb
fence, its main strength is lighter. Using 3mm wire instead of 4mm
allows even better visibility allowing a wider variety of
applications. It's lighter and cheaper, so it's ideal for
commercial applications.
Usages and Application 358 anti-climb fence
our 358 anti-climb fence system provides an ideal solution for a
wide variety of high-security perimeter and access control
applications. Widely used in villas, communities, gardens, schools,
factories and other flower beds, lawns, industrial and mining
enterprises, financial institutions, sports stadiums, convention
centers, squares, roads, balconies, residential use, its flowing
lines, simple and beautiful and full of rich modern residential
sensual, garden Light, villas era of high grade. Simple
installation, easy maintenance, easy to clean, affordable,
eliminating maintenance.
Clamp Types
Our 358 anti-climb fence available two types of clamp first is flat
steel made clamp bar and the second is M shapes Metal clamp you can
choose these clamps according to the requirements
358 anti-climb fence provides an ideal solution for a wide variety
of high-security perimeter and access control applications.
(sometimes referred to as prison mesh or 358 mesh) with its small
apertures and welds at each intersection eliminates foot and finger
holds, prevents objects from being passed through and is
particularly effective against the use of conventional hand cutting
tools.
358 anti-climb fence Specification
358 FENCE POST AND CLAMP BAR
- Galvanised rectangular hollow section 60 x 60 x 2.5mm bolt
through posts. Complete with 25 x 5mm slotted clamp bar, M8 x 100
galvanized cup square round bolts and hex. Nuts (sheer- nuts -
optional) with flat washers fixings at 305mm centers (9no fixings
per intermediate post). Posts and clamp bar polyester powder coated
Green RAL6005 / Black RAL9005 to pass 1000 hour salt spray testing.
- Post centres: 2440mm.
- Excess bolt thread at the rear of the post to be removed (flush
to the nut), ensuring no sharp edges and made suitable using a
zinc-etch primer paint.
Panel size H*W (mm) | Post size L*W*T(mm) | Post Height | Clamp Inter/Corners |
| 2000*2400 | 60*60*2.5mm | 2700 | 7/14 |
| 2400*2515 | 60*60*2.5mm | 3100 | 9/18 |
| 2997*2515 | 80*80*2.5mm | 3800 | 11/22 |
| 3607*2515 | 100*60*3mm | 4500 | 13/26 |
| 4204*2515 | 100*100*4mm | 5200 | 15/30 |
| 4496*2515 | 100*100*5mm | 5500 | 16/32 |
| 5207*2515 | 120*120*5mm | 6200 | 18/36 |
Specifications Promax 358 Security Mesh Australia Standard:
Mesh Design Ø4.00mm wire resistance welded at each intersection.
Line wires positioned at 75mm centers.
Crosswires positioned at 13mm centers.
Welding Resistance welded in compliance with the
requirements of AS2423-2002
Mesh Aperture 71mm x 9mm
Tolerances Sheet Width +/- 2mm
Sheet Length +/- 2mm
Mesh Aperture +/- 0.5mm
Wire Diameter +/- 0.08mm
Wire Ø4.00mm Zalcote XL Medium wire as per
OneSteel Market Mills wire specification.
Tolerance +/- 0.08mm
Wire Coating Mass Zinc Aluminium coating to AS/NZS4534
Class W10DZ
Minimum Coating Mass - 260 g/m2
Average Coating Mass - 300 g/m2
Tensile Strength Ultimate Tensile Strength 500-625 MPA
Average Tensile Strength 560 MPA
Weld Shear Strength Exceeds requirements specified in AS2423-2002
| Standard sheet size | |
2404mm x 3592mm | 75.7 |
2404mm x 2994mm | 64.7 |
2404mm x 2695mm | 58.1 |
2404mm x 2396mm | 51.6 |
2404mm x 2097mm | 45.2 |
2404mm x 1798mm | 38.5 |
Color
Galvanised & polyester powder coated Green RAL6005 / Black RAL9005
to pass 1000 hour salt spray testing.customized available
Install
Panels terminated at finished ground level OR Panels terminated
300mm below finished ground level in a 300mm x 300mm trench,
backfilled with Concrete / Pea gravel / Compacted fill.
Packaging 358 anti-climb fence
