AT92 silver Aluminum alloy 1/2" 1" 1.5" 2" spring return Pneumatic
single-acting actuator
WORKING CONDITIONS AND TECHNICAL DATA
1.Operating media:Dry or lubricated air or inert gases, provided
that they are compatible with the actuator internal parts and
lubricant. The operating media must have a dew point equal to –20°C
(-4°F) or at least 10°C below the ambient temperature. The maximum
particle size contained into the operating media must not exceed 30
µm.
2.Supply pressure:The maximum supply pressure is 8 bar (116 Psi),
only for AT801U it is 7 bar (101,5 Psi).
For double acting and spring return actuators the working pressure
is from 2.5 bar (36 Psi) to 8 bar (116 Psi).
3.Operating time (see technical data sheet):Caution: the operating
time depends on several factors
such as supply pressure, supply system capacity (pipe diameter,
flow capacity of pneumatic accessories), valve type, valve torque
and figures, applied safety factor,cycle frequency, temperature,
etc.
Important safety notice!
1.For safety reasons, the actuator must not be pressurized at any
time during installation as injury may result.
2.The utmost cleanliness is required during air supply connection
to the actuator i.e. the connecting pipe
thread, fittings and seals must be clean and dirt-free.
Quality Standards :
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount , but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance , according to the original quality
standards , during warranty with product problems , need
confirmation testing by the manufacturer , the supplier to be
solved , the demand side due to storage , use, poor maintenance
caused by lower-quality product , and not raise objections
Samples
You can send a sample to customize the products, we have many
engineers can help it; If you want a product of mine, but you are
not sure if it's what you want, so you can ask for a sample from
me, it will be free.
