Portable And Easy Operate Touch Screen Analyzer For Ultrasonic
Transducer And Horn
Specification:
Specification Performance | HS520A |
| Product feature | Portable, 8inch screen, Full touch screen |
| Dimension | L24cm,W19cm,H10cm |
| Frequency range | 1KHz~500MHz/1Mhz/hz |
| Measurement Index | All the parameters, the graph |
| Measurement Accuracy | < 0.5% |
| Measurement Speed | 5s/one pass(600scan point) Adjustable |
| Frequency Accuracy | ±10ppm |
| Phase Resolution | 0.15 degree |
| Environment Temperature | 10～40degree centigrade |
| Impedance Range | 1Ω～1MΩ |
| Frequency Step | 0.1Hz～any |
| Power Supply | AC100V～AC250V,50～60Hz, 30W |
| Application | Ultrasonic device |
Description:
For ultrasonic components measuring instrument, the most important
is the admittance chart, logarithmic graph of the two graphics (the
two graphics is the main method of qualified qualified), and more
than a dozen parameters: resonance frequency Fs, the maximum
conductance Gmax, bandwidth F2-F1, anti-resonance frequency Fp,
quality factor Qm, free capacitance CT, dynamic resistance R1,
dynamic inductance L1, dynamic capacitance C1, static capacitance
C0, effective electromechanical coupling coefficient Keff.
The measuring instrument which can easily replace much more complex
and more complicated, also many times more expensive instruments
from Agilent/HP, as for instance: HP Impedance Gain-Phase Analyzer
4294A, Agilent E5100A, Network Analyzer, HP 3563A,Control System
Analyzer etc. It is also very easy to use HS520A (by engineers or
ordinary production workers).
HS520A is based on the HS70A and HS80A, a new generation of
ultrasonic components analyzer;
Features:
1. Large screen, full-screen touching, making the HS520A both
HS70A-P(computer version) operating experience, and no cumbersome
with a sense of computer operation.
2. Relies on the new powerful ARM processor data processing
capacity, HS520A measurement accuracy is much higher than HS70A-D
(with display version), can achieve HS70A-P(computer version)
level.
3. Full-screen touch operation is more user-friendly, no longer
need HS70A-D(own display version) a large number of physical
buttons, thus operating instruments becomes extremely simple, the
production size smaller, lighter and more portable.
4. Connecting the computer to operate as HS70V-P. The software is
fully compatible, the user are no longer familiar with software
operation.
5．HS520A was taken into account the needs of automated production
line operation in the development time, reserved the 232interface
with PLC communication and IO communication interface (replay input
and output)
6. HS520A operation is no longer based on Windows system, with
long-term reliable operation capacity in the production line.
Application:
·Operation
· Sonotrode tuning
· Test of transducers
· Test of acoustic sets
·Test of piezo ceramics
· Predictive maintenance
Competitive Advantages:
1,Virtually any hard material can be machined
2,Little heat is produced
3,Since the motion of the tool is up-and-down vibration rather than
rotation as in traditional machining, the holes cut are not limited
to circular shapes but can be any shape. Custom "cookie cutter"
tools can cut complicated shapes.
4,Good surface finish and higher structural integrity is obtained
Portable And Easy Operate Touch Screen Analyzer For Ultrasonic
Transducer And Horn
