KSD302 temperature protector switch,KSD302 bimetal thermostat
KSD302 large current thermostat / KSD302 large current thermal
protector
1. KSD302 large current temperature protector’s Principle and
structure
KSD302 series temperature controller, is to bring the double shell
fully enclosed metal contact temperature type temperature relay,
according to heat bilges cold shrink principle make sheet metal
bending, to set off the temperature, temperature drop can be
manually reset after, on electric up security role.
2. KSD302 large current thermostat’s specification
(1) Function: temperature protection and overheating protection,
prevent dry heating
(2) The electrical characteristics: AC250V ~ 400 V / 15 A ~ 60 A
(3) the highest environment temperature: 180 °C
(4) working temperature range: 0 °C ~ 250 °C (optional).
Temperature tolerance: +- 5
(5) Normal headscarf insulation resistance: > 100 M Ω
(6) normal contact resistance: more than 100 m Ω
(7) service life: > 50000 times
3. Application of KSD302 large current temperature protector
(1) Electric welding machine, electric
(2) Electric equipment,
(3) Electric products,
(4) Steam heater
(5) High power machinery equipment
(6) Demand Water Heaters
4. Attention of KSD302 large current thermostat
(1) By using the contact temperature type when installed, should
make metal cap surface adhere is accused of mounting surface of the
appliance.
(2) When installation shall not cover surface pressure deformation,
lest affect performance.
(3) To prevent leakage, when using, can't let the fluid
infiltration within the thermostat, lest affect electric
reliability.
(4) This product for bipolar type wiring way, when using, according
to mark symbol, correct connection.
The product should be a headscarf in relative humidity is less than
90%, the environment temperature below 40 ℃ ventilation, clean,
dry, no corrosive gas storage in the warehouse.
