carbon steel QD Bushing SF bushings taper lock and Stainless Steel Taper Bushing

Taper bushes (TL bushes)

A taperlock clamping bush, also called a taper bush, is a conical machine element to provide an interference-fit shaft-hub connection in mechanical engineering. This clamping element fixes the hub of a V-belt pulley, for example, precisely in the axial center of a shaft. It already has a bore and keyway for the most common shaft diameters. They currently come in 16 sizes for shaft diameters from 10 mm to 125 mm.

Taper bushes classification

Taper bush is mainly divided into TB taper bush, QD taper bush and STB taper bushi. The holes at the matching place of taper bush and belt pulley are half side, and the two optical holes on the cone sleeve and the two threaded holes on the belt pulley respectively constitute a complete hole. A threaded hole on the cone sleeve and a optical hole on the belt pulley constitute a complete hole.During assembly, the two screws in the two threaded hole of pulley, as the screw tight, continuously in the threaded hole on the pulley pushed screw thread role the pulley on the small end of the cone hole, the conical sleeve on the two holes were not completely processing wear light, so, when the bottom of the screw head against the light hole, the force will be passed to the taper sleeve, taper sleeve is relative to the pulley to the pulley cone hole the small end of the campaign, at this time, because of the taper, taper bush have been wrapped tight shaft, the shaft and reaction in the taper bush, and ACTS on the pulley.In this way, the pulley, cone sleeve and shaft are tightly assembled together.

PRODUCT FAQ:

Remark:

If you want to know more product's details, please contact me at any time.I will reply you ASAP. many thanks.

CONTACT US:

A Youthful, Professional, Responsible Sprocket Manufacturer

Mr.Sprocket (Shengzhou Tomorrow Machinery Co., Ltd was applied for the trademark) was found in 2011, located in Sanjie Industrial Park,Shengzhou City,ZhejiangChina.

Since 1990, the Chairman of Mr.Sprocket was one of a packing-cases supplier for power transmission factories in Shengzhou City, which is the biggest sprockets base in China. For a long time preparation and at the beginning of 2011,we set up a sprockets factory as a new branch. Mr.Sprocket covers 20,000 square meters, brings in all new machines: Gear Hobbing machine, High-precise CNC, Sawing machine, Drilling machine, Milling machine,Broaching machine, Induction hardening machine and others. Mr.Sprocket total invest more than 2.5 million USD to start.

Now, Our annual output is around 3 million USD, 120,000 piece products can be produced per month. It means around 250 cases can be finished, Total capacity is seven containers per month. All products were 100% exported, European and US and Asia are the main markets.

Through all the efforts of Mr.Sprocket staff, Mr. Sprocket will become the well-known sprockets supplier in the world.