YASKAWA Japan Electric 0.45KW servo driver 3Phase Input 5.0 AMPS
SGDB-05ADG
Quick Details
Model:SGDB-05ADG
Product Type :AC Servo Drive
Specification
Input: 200-230v 50/60Hz 3-PH 5A
Output: 0-230v 3PH 3.8A 0.45kW
The SGDB Sigma Series Servopacks are Amplifiers for the Sigma
Series of AC Servos. Designed for applications requiring
multi-drives, the SGDB can be used for speed control, torque
control, and position control. A digital operator can be used to
set parameters for a Servopack.
Yaskawa SGDB Sigma Series AC Servopacks
Features
230VAC Three-Phase Input Power
Accepts an Analog Voltage Speed Reference
Three Internally Set Speeds
Compact Design
Similar Products
SGDB-20ADG
SGDB-20ADM
SGDB-20ADP
SGDB-20ADS
SGDB-20ADS /G/M+SGMS-20ACA2C/SGMS-20ACA21
SGDB-20ADS G
SGDB-20ADS M
SGDB-20ADS M+SGMS-20ACA21
SGDB-20AN
SGDB-20VD
SGDB-20VN
SGDB-30AD
SGDB-30ADG
SGDB-30ADG-P
SGDB-30ADM
SGDB-30AN
SGDB-30AN-P
SGDB-44AD
SGDB-44ADG
SGDB-44ADGY181
SGDB-44ADGY8
SGDB-44ADM
SGDB-44ADS
SGDB-50ADS
SGDB-50ADTY283
SGDB-50ADTY283+SGMT-40A2A-NV13
SGDB-60AD
SGDB-60ADB
SGDB-60ADG
SGDB-60ADM
SGDB-60DV
SGDB-60VD
SGDB-75AD
.
Open Chassis Type (IEC IP00)Protected so that parts of the human
body cannot reach electrically charged parts from the front when
theDrive is mounted in a control panel, also called (protected
chassis).TERMSNEMA 1 Type (IEC IP20)The Drive is shielded from the
exterior, and can thus be mounted to the interior wall of a
standard building(not necessarily enclosed in a control panel). The
protective structure conforms to the standards of NEMA 1in the USA.
Top protective cover (Fig 1.4) must be installed to conform with
IEC IP20 and NEMA Type 1requirements.
Please perform the following tasks after receiving the PROFIBUS-DP
Option:• Inspect the PROFIBUS-DP Option for damage.If the
PROFIBUS-DP Option appears damaged upon receipt, contact the
shipper immediately.• Verify receipt of the correct model by
checking the information on the nameplate (see• If you receive the
wrong model or the PROFIBUS-DP Option does not function properly,
contact your supplier.
4 PROFIBUS-DP Option ComponentsuCommunication connectorThe drive
has a 9 pin D-sub connector for installing the option card. Once
installed, the drive can connect to aPROFIBUS network.Figure
4PROFIBUS ConnectorBottom View162738495uPROFIBUS-DP Option LED
DisplayDisplayLEDColorRUNGreen(Power)ERRRed(Option
Error)COMM(CommunicationGreenStatus)BF(PROFIBUS-DPRedError)10Figure
4 Communication connector locationTable 3 Communication connector
(9-pin
D-SUB)PinSignal1Shield2–3RxD/TxD-P4CNTR-P5DGND6VP7–8RxD/TxD-N9–Table
4 LED DisplayCommunicationStatusStatusONPower is onOFFPower is
offONSI-P3/V errorFlashingDrive connection errorOFFNormal
operationCommunicationONconnectedOFFNo data exchangeWaiting
forONcommunicationprocedure settingCommunication
settingFlashingerrorOFFNormal operationConnected to the metal-shell
(no direct FG-connection)Receive/Transmit data; line B (red)Control
signal for repeaters (direction control)Data ground (reference
voltage to VP)Power supply output for bus termination (for
termination resistor)Receive/Transmit data; line A (green)Power is
being properly supplied to SI-P3/V, and SI-P3/V has completed
itshardware self-diagnostics check• The drive has no power supply•
SI-P3/V and drive are not connected properly and/or there is no
powersupplied to the SI-P3/V• An internal, self-diagnostic error
occurred in the SI-P3/VSelf-diagnostics error occurred in the
SI-P3/VConnection error between SI-P3/V and drive. This includes
node addresssetting errors to parameter F6-30 on the drive
sideDrive and SI-P3/V are properly connectedNormal send/receive
between SI-P3/V and PROFIBUS-DP masterThere is a problem
establishing communication between SI-P3/V and thePROFIBUS-DP
masterCommunication-related parameters are being set or initialized
by thePROFIBUS-DP master.Communication parameter error from
PROFIBUS-DP masterLED is off once the PROFIBUS-DP master is
finished settingcommunication-related parameters
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
