ASTM B165 MONEL 400 / UNS NO4400 / DIN 2.4360 NICKEL ALLOY SMLS PIPE

ASTM B165 MONEL 400 / UNS NO4400 / DIN 2.4360 NICKEL ALLOY SMLS PIPE

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Monel 400 characteristics:

• 1. Resistant to seawater and steam at high temperatures.
• 2. Excellent resistance to rapidly flowing brackish water or seawater.
• 3. Excellent resistance to stress corrosion cracking in most freshwaters.
• 4. Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.
• 5. Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids.
• 6. Excellent resistance to neutral and alkaline salt.
• 7. Resistance to chloride induced stress corrosion cracking.
• 8. Good mechanical properties from sub-zero temperatures up to 1020° F.
• 9. High resistance to alkalis.

Monel 400 Application:

• 1. Marine engineering.
• 2. Chemical and hydrocarbon processing equipment.
• 3. Gasoline and freshwater tanks.
• 4. Crude petroleum stills.
• 5. De-aerating heaters.
• 6. Boiler feed water heaters and other heat exchangers.
• 7. Valves, pumps, shafts, fittings, and fasteners.
• 8. Industrial heat exchangers.
• 9. Chlorinated solvents.
• 10. Crude oil distillation towers.